User's Manual

Bluetooth
Bluetooth
True Wireless Earbuds
TE-D01v
Want touse earphones on one side only
Turn OFF oneside of the earphone to use it alone.
If you use the external sound capture mode on one side,youcanuse iton the L side only.
Note:ANC mode cannot be used on one side only.
Correct reset method (in case of operation failure
Delete the Bluetooth setting of the connected device.
Bluetooth
自分のデバイス
AVIOT TE-D01v
接続済み i
接続解除
or
削除
User manual
Pairing
For more information about pairing, please check
the QR code on the right
Turn ON Bluetooth ON the connected device
Bluetooth
Turn ON the earphones.
10 seconds
user manual: v1.0
And connect it to a
connected device
One of the leds flashes orange and
white
Press and hold the touch sensor ON the l-side for 1.5 seconds
The ambient microphone mode
touch sensor
microphone
LED
USBTypeC
Ears caps S/M/L
Power ON/OFF
When switching with a charging case
Changemethodofpairingdevice(Ifyouhavemultipledevices,
Changefromtheuseddeviceside
Bluetooth
自分のデバイス
AVIOT TE-D01v
接続済み i
Bluetooth
1535
3
Please try again with another connected device from (3) "pair"
★When changing from the earphone itself
With the earphones ON, press and hold the earphones ON the R side until the
sound effect plays
ANC
Mode to sound effect
Anc mode "please press and hold after voice guidance。
※Please release your finger immediately after the sound effect.。
3 Please try again with another connecting device
Changing from charging case
Place the headphones in the charging case, make sure the orange LED is on, and then press the physical
button on the back of the case twice. After the battery indicator flashes, remove the earphones from the case
and they will go into pairing mode。
Preseed Japan Corporation
FCC ID: 2A9B6TE-D01V
ON : LED w hite
OFF : LED orange
Bluetooth
自分のデバイス
AVIOT TE-D01v
i
Bluetooth
15:35
ANC
Bluetooth
その他のデバイ
AVIOT TE-D01v
Bluetooth
15:35
Push twice
hold it down for 4.5 seconds
Flashing speed
15:35
15:35

Summary of content (2 pages)