User's Manual

26
3. IE Log In
1) Web client Log In
Input the default IP address 192.168.5.163 of the camera in the address bar of browser, and click
“Enter” to enter Web Client login page as shown in the picture below. User can login as administrator
and normal user.
• If login as administrator (default user name/password: admin), users can do preview,
playback, and configuration in the web interface;
• If login in as normal user (default user name/password:user1 or user2), users can only do
preview or playback, no option for configuration.
• Note: Web access supported browsers: IE (recommended), 360 browser and other
conventional browsers.
2) Download/Install Plug in
When using IE browser to access the AV-1280/1281 for the first time, a message will show at the login
page: “Playback plug-in is not installed, please download and install!”. Click on this message, download
and install MRWebXinstall.exe according to instruction prompts.
After installing the plug-in, enter user name and password (default user name and password: "admin",
users can change the user name and password after first login).
3) Preview
After logging in successfully, the video preview interface will show. In the preview interface, users can
control pan, tilt, zoom, focus, video capture, sound, focus, full screen, set/ run/ delete preset positions.
• Login as administrator
Default user name & password: admin
Operation options: PT control; zoom, focus, video capture, sound, zoom, full screen, set/ run/ delete the
preset positions. Also, the user can perform preview, playback and configuration of the captured video.
• Login as normal user
Default user name & password: user1 or user2
Operation options: PT control; zoom, focus, video capture, sound, zoom, full screen, set/ run/ delete the
preset positions. The user you can only perform preview or playback of the captures video. No
configuration operation is allowed for normal user.