User's Manual

Recording packing time (minute): To set recording video packing time (default is 10, range from

1~120 minutes).

Recording/Snapshot file type: To set the recording file type (default MP4, other option: TS).

Recording/Snapshot file storage route: To set local recording video/snapshot file storage route

(default D:\MyIPCam\).

Click “Save” to save the settings, and reboot to make settings effective.

2) Audio Configuration

Enable: Check to enable the audio.

Encode Type: To set audio compressing format. The changes will be saved and will take effect

after rebooting (default AAC, other options: MP3, G.711A).

Sample Rate: To set the sampling frequency. The changes will be saved and will take effect after

rebooting (default 44100, other options: 16000, 32000, 48000).

Sample Bits: To set the sampling precision (default 16bits).

Bit Rate: To set the audio compressing rate (default 64 Kbps, other options: 32, 48, 96, 128

Kbps).

Channel: To set the audio channel (Default: Stereo, other option: Mono).

Input Volume: To set the input audio volume (Default 2, ranges from 1~10).

Click “SAVE”, and a message will show: “Success! Open audio or change other parameters need

to restart.” Please reboot the camera to bring new settings into effect.

4.2.5 Video configuration

1) Video Encode

Stream: To choose from Main/Sub video stream output.

Compressed Format: To set the video compression format (Default: H.264, other option: H.265).

Image Size: To set the video resolution (Main stream default: 1920*1080, other options:

1280*720, 640*480; Sub stream default: 320*180, other options: 640*360, 320*240, 640*480,

1280*720, 1920*1080).

Rate Control: To set the rate control mode (Default CBR- constant bitrate, other option: VBR-

variable bitrate).

Image Quality: To set the image quality (Main stream default: Best; Sub stream default: Better).