User's Manual

29
Bit Rate (Kb/S): To set the video bit rate (Main stream default 4096, ranges from: 64~12288; sub
stream default 512, ranges from 64-10240).
Frame Rate (F/S): To set the video frame rate (Default: 25, other options: main stream ranges
from 5~60; sub stream ranges from 5~30).
I Frame Interval: To set the key frame interval (Default: 75, other options: main stream ranges
from 1~300; sub stream ranges from 1~150).
I Frame Min QP: To set the minimum QP of the key frame (Default 10, ranges from 10~51).
Stream Name: To set the stream name (Main stream default: live/av0; Sub stream default:
live/av1). Note: when modifying the Stream Name, please always reserve “live/”, and only modify the
latter part.
Click “SAVE”, and a message will show: “Save successfully!” Please reboot the camera to bring
new settings into effect.
2) Stream Publish
Stream: To choose from Main/Sub video stream output.
Enable: Check to enable the stream publish.
Protocol Type: RTMP
Host Address: To set the server IP address (Default 192.168.5.11).
Host Port: To set the server port number (Default 1935, ranges from 0~65535).
Stream Name: To set the stream name (Default: live/av0, live/av1).
User Name: To set the user name.
Password: To set the password.
Click “SAVE”, and a message will show: “Save successfully!” Please reboot the camera to bring
new settings into effect.
Note: to obtain RTSP: rtsp://device IP address: 554/live/av0 (av0 main stream; av1 sub stream).
3) RTP Multicast
Stream: To choose from Main/Sub video stream output.
Enable: Check to enable the RTP Multicast.
Protocol Type: To choose the multicast protocol (Default: RTP, TS for option).
Multicast Address: To set the multicast address (Default: 224.1.2.3).