User's Manual

30
Multicast Port: To set the multicast port (Main stream port default: 4000; sub stream port default
4002).
Note: Access Method: rtp://224.1.2.3:4000; udp://@224.1.2.3:4000;
4) Video Parameters
a. Focus:
Focus Mode: To set the focus mode (Default: Auto, other options: Manual, OnePush).
AF-Zone: To set the focus range (Default: Center, other options: Top, Bottom, All).
AF-Sensitivity: To set the focus sensitivity (Default: low, other options: high, middle).
b. Exposure:
Exposure Mode: To set the exposure mode (Default: Auto, other options: manual, SAE, AAE,
Bright).
EV: To set the exposure compensation (Default: OFF, ranges from -7~7).
BLC: To set the backlight compensation (Default: OFF).
Flicker: To set the anti-flicker setting (Default: 50Hz, other options: OFF, 60Hz).
G.Limit: To set the gain limit, active when under aperture or brightness priority (Default 4, ranges
from 0~15).
DRC: To set the dynamic range (Default 4, ranges from 0~8).
c. Color:
WB Mode: To set the white balance mode (Default: Auto, other options: 3000K, 3500K, 4000K,
4500K, 5000K, 5500K, 6000K, 6500K, 7000K, Manual, OnePush). Note: Click the “Adjust” button
when selected the One-push mode.
RG Tuning: To set the red gain, active when under Manual (Default 0, ranges from -10~10).
BG Tuning: To set the blue gain, active when under Manual (Default 0, ranges from -10~10).
Saturation: To set the saturation value (Default: 100%, other options: 60%, 70%, 80%, 90%,
110%, 120%, 130%, 140%, 150%, 160%, 170%, 180%, 190%, 200%).
Hue: To set the hue value (Default: 7, ranges from 0~14).
AWB Sensitivity: To set the sensitivity of auto white balance (Default High, other options: low,
medium).