User's Manual

32
Master Stream OSD Font Size: To set the character size of main stream (Default: 48, ranges from
28-200).
Slave Stream OSD Font Size: To set the character size of the sub stream (Default: 48, ranges
from 28-200).
7) Video Out
Output Out Format: To set the video output format. 1080P60/ 1080P50/ 1080P30/ 1080P25/
1080I60/ 1080I50/ 720P60/ 720P50/ 720P30/ 720P25/ 1080P59.94/ 1080I59.94/ 1080P29.97/
720P59.94/ 720P29.97.
4.2.6 Network Configure
1) Network Port
Port Data: To set the data port (Default 3000, ranges from 0-65535).
Port Web: To set the web port (Default 80, ranges from 0-65535).
Port Onvif: To set the Onvif port (Default 2000, ranges from 0-65535).
Port Soap: To set the soap port (Default 1936, ranges from 0-65535).
Port RTMP: To set the RTMP port (Default 1935, ranges from 0-65535).
Port RTSP: To set the RTSP port (Default 554, ranges from 0-65535).
Port Visca: To set Visca port (Default 3001, ranges from 0-65535).
To access RTSP: RTSP://equipment IP address: 554/live/av0 (av0 main stream; av1 sub stream)
To access RTMP: RTMP://equipment IP address: 1935 / live/av0 (av0 main stream; av1 sub
stream)
2) Ethernet
DHCP: Check to enable obtaining IP automatically.
IP Address: To set the IP address (Default 192.168.5.163). Note: This IP address is the same with
the one used to login Web page.
Subnet Mask: To set the subnet mask (Default 255.255.255.0).
Default Gateway: To set the default gateway (Default 0.0.0.0).
MAC Address: To set the physical address (this parameter is read-only, modifying is not
recommended).