User manual

Overview of Premium Security Suite
39
 Click Next.
The dialog box Select profile appears.
 Select the profile to be scanned.
Note
Only backup profiles for which a save location has been stipulated are displayed.
 Click Next.
The dialog box Time of job appears.
 Select a time for the scan:
• Immediately
• Daily
• Weekly
• Interval
• Single
• Login
• Plug&Play
A backup is always created for the Plug&Play event if the removable disk selected
as the save location of the backup profile is connected to the computer. The
backup event Plug&Play requires a USB stick to be entered as a save location.
 Where appropriate, specify a date according to the selection.
 Where appropriate, select the following additional options (availability depends on
job type):
• Repeat job if the time has already expired
Past jobs are performed that could not be performed at the required time, for
example because the computer was switched off.
 Click Next.
The dialog box Select display mode appears.
 Select the display mode of the job window:
• Minimize: progress bar only
• Maximize: entire backup window
• Hide: no backup window
 Click Finish.
Your newly created job appears on the start page of the Manager :: Scheduler
section with the status activated (check mark).
 Where appropriate, deactivate jobs that are not to be performed.
Use the following icons to further define your jobs:
View properties of a job
Modify job
Delete job