SE32HYT
CONTENTS CONTENTS Important Safety Instructions 2 Safety Information 3 Preparation What's Included Front View Rear View Installing the Stand Removing the Stand for Wall-Mounting Remote Control 4 4 5 6 7 7 8 Connecting External Devices 9 Customizing TV Settings Initial Setup Navigating the Setup Settings Streaming Media Viewing Photos Listening to Music Source Setup Settings Audio Picture Channel Time Network Lock 10 10 11 12 13 13 14 14 15 15 16 17 18 18 19 21 Parental Control 22 Troubleshooti
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed.
SAFETY INFORMATION SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components.
PREPARATION PREPARATION What's Included DU VO INFO B US A VG MI HD TV Set En -4 Remote Control with Batteries TV Stand Four Screws(M4X14) User Manual Quick Start Guide User Manual Quick Start Guide
PREPARATION Front View 1. POWER Switch the TV between On / Standby mode. 2. SOURCE Press to select among different input signal sources. 3. MENU Display the main menu. 4. CH / Press to select a channel. 5. VOL -/+ Press to adjust the volume. 6. POWER Indicator Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode. 7. IR (Infrared Receiver) Receive IR signals from the remote control.
PREPARATION 10. Rear View 1. Power Cord Connect to AC power outlet. 2. Headphone Socket Connect to the Headphones. 3. USB Port Connect to a USB storage device to play compatible audio and photo 4. LAN Network connection port. 5. HDMI Input Connect to a (HD) signal input device. 6. VGA Input Connect to a computer or other devices with a VGA interface. 7. PC AUDIO Input Connect to a computer audio output. En -6 8. DTV/TV Input Connect to the antenna (75Ω VHF/UHF) socket with the RF coaxial cable. 9.
PREPARATION Installing the Stand • 1 Lay the TV face-down on a flat, cushioned surface to avoid damages or scratches. • 2 Fix the left base stand to the TV using the 2 pcs provided screws. • 3 Fix the right base stand assembly to the TV using the 2 pcs provided screws. Removing the Stand for Wall-Mounting • 1 Lay the TV face down on a flat, cushioned surface to avoid damages or scratches. • 2 Untighten the 4 pcs screws holding the stand assembly and remove them.
PREPARATION Remote Control VODU INFO INFO HDMI VGA USB 4 5 HDMI: Select the HDMI mode directly. USB: Select the USB mode directly. VGA: Select the VGA mode directly.
CONNECTING EXTERNAL DEVICES CONNECTING EXTERNAL DEVICES Blu-ray Player / Recorder Game Console Satellite Video Camera Antenna Cable OR Digital Audio System Satellite Receiver VCR Composite/Component Cable (not included) Optical Cable (not included) HDMI 3 Audio Cable (not included) RF Cable(not included) HDMI 2 HDMI 1 VGA Cable 3.
CUSTOMIZING TV SETTINGS CUSTOMIZING TV SETTINGS Initial Setup • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. • In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. • The first time you turn the TV on, it will go into the Setup Wizard.
CUSTOMIZING TV SETTINGS 7 8 7 6 MENU :Exit 9 8 9 • If channels can not be found, this frame will be displayed automatically. Navigating the Setup Settings • Press the MENU button to display the main menu. • Use buttons to select SETUP menu and then press navigate and select the available menu.
CUSTOMIZING TV SETTINGS STREAMING • Press the MENU button on the main unit or on the remote control to display the STREAMING. Then press buttons to select the desired APP and press OK button to view what you want. Or press the hotkey on the remote control to enter the APP directly. Note:After the TV connects to network, the status Unconnected will alter to Connected. NETFLIX YouTube VUDU Toongoggles Pandora AccuWeather En - 12 Enjoys TV shows & movies streamed instantly over the Internet.
CUSTOMIZING TV SETTINGS MEDIA NOTE:Portable storage devices( USB disk or Hard disk) should be inserted. • Press the MENU button on the main unit or on the remote control and then press buttons to select the MEDIA, and then press OK button to enter. Viewing Photos MEDIA Device Found: 1 Return PHOTOS WMAW MV WMEW MN WMTW MY MB WMC MUSIC WMDW Device: 1 • After entering MEDIA, press disk type to enter. Then use and then press OK button enter.
CUSTOMIZING TV SETTINGS Listening to Music MEDIA Device Found: 1 Return PHOTOS WMAW MV WMEW MN WMTW MY MB WMC MUSIC WMDW Device: 1 Directories:10 WMU Files:0 Total:10 1/1 MEDIA Crazy in love.mp3 Vol.7 Status: Play 00 01 14 • After entering MEDIA, press disk type to enter. Then use and then press OK button enter. 00 04 16 buttons to select MUSIC and then select the / buttons to navigate in the music folder Note: File format supported: MP3.
CUSTOMIZING TV SETTINGS SETUP • Press the MENU button on the main unit or on the remote control to display the buttons to select SETUP menu and press main interface. Then press button to select the desired option. SETTINGS • Press buttons to select SETTINGS menu and then press OK button to enter. Press buttons to select the following setting options and then press buttons to adjust each option’s setting.
CUSTOMIZING TV SETTINGS Advanced Closed Caption DLC Restore Default Adjust advanced option’s setting: H-POS, V-POS, Clock, Phase or Auto. (VGA source mode only) CC Mode Select CC mode : On, Off or CC on Mute. Basic Basic Selection: CC1, CC2, CC3, CC4, Selection Text1, Text2, Text3, Text4. Advanced Advanced Selection: Service1, Service2, Selection Service3, Service4, Service5, and Service6.
CUSTOMIZING TV SETTINGS PICTURE buttons to select PICTURE menu and then press OK button to enter. • Press Press buttons to select the following picture options and then press buttons to adjust each option’s setting. Picture Mode Blue Screen Brightness Contrast Color Sharpness Tint Color Temp. Cycle among picture mode: Dynamic/Movie/Energy Saving/User/Standard. Alternative: you may press the P.MODE button to select the picture mode directly.
COSTOMIZING TV SETTINGS CHANNEL • Press buttons to select CHANNEL menu and then press OK button to enter. Press buttons to select the following channel options and then press buttons to adjust each option’s setting. Air/Cable Auto Scan Favorite Show/Hide Channel Name Label Signal Information Select antenna between Air and Cable. First, select your cable system from Auto/STD/IRC/HRC. Next, select the Auto Scan feature to scan your available cable channels.
Sleep Timer Time Zone Daylight Saving Time Select a period of time after which the TV automatically switches to standby mode: Off/5/10/…/180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly. Select a Time Zone: Hawaii/ Alaska/ Pacific/ Mountain/ Central/ Eastern/ Atlantic/ Newfoundland. Select to turn On/Off daylight saving time. NETWORK • Press buttons to select NETWORK menu and then press OK button to enter.
• If there is a new version, it will be downloaded in the background. When you want to enter the app, a menu bar will pop up reminding you that upgrade software is downloading. Please try later... • After the download completed, it can upgrade automatically after users press the standby button. Note: This procedure is fully automatic, and remember not to cut off the power. Manual Upgrade • After the TV connects to network, users can detect whether there is a new version through network manual option.
LOCK • Press buttons to select LOCK menu and then press OK button to enter. Use the 0-9 buttons to input 4-digit password to enter the LOCK menu. • Press buttons to select the following lock options and then press buttons to adjust each option’s setting. Note: the default password is “0000”. Change Password System Lock USA Canada RRT Setting Reset RRT Clear Lock Use 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation.
PARENTAL CONTROL PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV.
PARENTAL CONTROL • Motion Picture Association of America (MPAA) Rating System G PG Grade General Audiences Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 X No Rating No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.
TROUBLESHOOTING TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond • The TV may freeze up during use.
TROUBLESHOOTING The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from an unusual noise when the TV is switched on or off and does inside the TV not indicate a fault with the TV.
SPECIFICATION SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Display Resolution HDMI Support Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle (At CR>10) Vertical Viewing Angle (At CR>10) Wall-mount(LxW-mm) 31.