Manual

User’s Manual
Detection Area
This option allows you to specify a multi-feed detection area.
To specify a multi-feed detection area,
1. Choose Disable from the Intelligent Mode. The Detection
Area will be enabled.
2. Choose Inside the Range or Outside the Range. The
detection area will be highlighted.
3. Drag your mouse pointer on the top or the bottom of the
detection area to specify your area in the display window.
Or you may use the up and down arrow key of the Top
and Bottom to change its size. The Top indicates the
starting position of the detection range. The Bottom
indicates the ending position of the detection range. Note
the top value and the detection range has to be at least 1
inch.
Detection Area: Inside the Range, Box, Top: 3”, Bottom: 7”
4-41