User Guide
Table Of Contents
- 1. Installing the Button Manager
- 2. Scanning From the Button
- 2.1. Checking the Button Configurations Before Scanning
- 2.2. The Default Button Settings
- 2.3. Scanning From A Simple Touch of the Button
- 2.4 Performing Continuous Scan From the Flatbed
- 3. Configuring the Buttons
- 3.1. A Glance of the Button Properties Window
- 3.2. Choosing New Settings For A Button
- 3.3. Choosing a Proper File Format
- 3.4 Adding A New Destination Application
- 3.5 Deleting A Current Destination Application
- 3.6 Creating A New Scan Configuration
- 3.7 Deleting A Current Scan Configuration
- 3.8 Selecting Options For a Button
- 3.9 Removing a Blank Page
- 3.10 Setting the Power Saving Mode
- 3.11 Saving and Loading Profiles
- 3.12 Solving A Problem
- Index
2.4 Performing Continuous Scan From the Flatbed
If your scanner comes with a flatbed module, Button Manager
provides you a convenient feature to perform continuous
(multi-page) scan from the flatbed. Simply inserting next page
of your document and then pressing the Scan button, your
multi-page scan from the flatbed can be completed. This
feature is particularly useful when you need to scan inside pages
of a book.
To perform continuous scan from the flatbed,
1. Open the document cover.
2. Place your document with the text facing down on the glass.
Make sure that the upper left corner of your document is
near the home position as marked by arrow.
3. From the Button Properties window, choose your file
format to be PDF, TIFF, or DjVu.
Document
Document
Glass
4. From the Options tab in the Button Properties window,
choose “Multi-Page”.
10