User Guide
Table Of Contents
- 1. Installing the Button Manager
- 2. Scanning From the Button
- 2.1. Checking the Button Configurations Before Scanning
- 2.2. The Default Button Settings
- 2.3. Scanning From A Simple Touch of the Button
- 2.4 Performing Continuous Scan From the Flatbed
- 3. Configuring the Buttons
- 3.1. A Glance of the Button Properties Window
- 3.2. Choosing New Settings For A Button
- 3.3. Choosing a Proper File Format
- 3.4 Adding A New Destination Application
- 3.5 Deleting A Current Destination Application
- 3.6 Creating A New Scan Configuration
- 3.7 Deleting A Current Scan Configuration
- 3.8 Selecting Options For a Button
- 3.9 Removing a Blank Page
- 3.10 Setting the Power Saving Mode
- 3.11 Saving and Loading Profiles
- 3.12 Solving A Problem
- Index
5. Check if the number displayed in the LCD screen is your
favorable setting for the scanned image.
6. Press the Scan button on the scanner.
7. When the scanner completes first-page scan, a “Continue
or stop” dialog box appears.
8. Place next page of your document on the glass.
9. Choose “Continue” or simply press the Scan button on the
scanner to scan next page.
10. If your scan is completed, click “Stop” to close the dialog
box.
Note:
1. The scanner is designed to automatically set your scan
source. If your scanner is equipped with both the auto
document feeder and the flatbed, the scanner can
automatically set your scan source whenever there is
paper on the source. However, if there is paper on both
the auto document feeder and the flatbed, the scanner will
set auto document feeder to be the scan source.
2. If you choose to perform flatbed scan, the scanner can still
perform “automatic crop” and “deskew” for the scanned
image. However, the “Multi-feed Detection” and “Duplex”
functions will be disabled.
11