User Guide
Table Of Contents
- 1. Installing the Button Manager
- 2. Scanning From the Button
- 2.1. Checking the Button Configurations Before Scanning
- 2.2. The Default Button Settings
- 2.3. Scanning From A Simple Touch of the Button
- 2.4 Performing Continuous Scan From the Flatbed
- 3. Configuring the Buttons
- 3.1. A Glance of the Button Properties Window
- 3.2. Choosing New Settings For A Button
- 3.3. Choosing a Proper File Format
- 3.4 Adding A New Destination Application
- 3.5 Deleting A Current Destination Application
- 3.6 Creating A New Scan Configuration
- 3.7 Deleting A Current Scan Configuration
- 3.8 Selecting Options For a Button
- 3.9 Removing a Blank Page
- 3.10 Setting the Power Saving Mode
- 3.11 Saving and Loading Profiles
- 3.12 Solving A Problem
- Index
3. Configuring the Buttons
The Button Manager allows you to change current button
configurations, rename destination application, or change your
destination application. The scanned image is either shown in
the main window of the specific destination application or served
as an attachment to the application.
3.1. A Glance of the Button Properties Window
The Button Properties window allows you to choose new settings
for the buttons. The Button Properties window lets you select a
File Format, a Scan Configuration, a Destination Application,
and change other scan settings.
12
Click to select
options or
setting.
The button
number and
name.
The scan
settings for the
selected button.
(in this case
button #1).
The destination
application. (This
is the application
that opens after
you have finished
scanning.)
The file format of
the scanned
image.