User Guide
Table Of Contents
- 1. Installing the Button Manager
- 2. Scanning From the Button
- 2.1. Checking the Button Configurations Before Scanning
- 2.2. The Default Button Settings
- 2.3. Scanning From A Simple Touch of the Button
- 2.4 Performing Continuous Scan From the Flatbed
- 3. Configuring the Buttons
- 3.1. A Glance of the Button Properties Window
- 3.2. Choosing New Settings For A Button
- 3.3. Choosing a Proper File Format
- 3.4 Adding A New Destination Application
- 3.5 Deleting A Current Destination Application
- 3.6 Creating A New Scan Configuration
- 3.7 Deleting A Current Scan Configuration
- 3.8 Selecting Options For a Button
- 3.9 Removing a Blank Page
- 3.10 Setting the Power Saving Mode
- 3.11 Saving and Loading Profiles
- 3.12 Solving A Problem
- Index
3.4 Adding A New Destination Application
The Button Manager allows you to add your own software
applications as a destination for your scanned image.
To add a new destination application,
1. From the Button Properties window, click Add/Delete.
The Application Manager window appears.
2. Choose Add in the Application Manager window to prompt
the Add A New Application window.
3. From the Add A New Application window, follow these
steps.
Step 1: Enter or select the path to the new application.
Step 2: Name the application. The name will be shown in the
Choose a Destination area.
Step 3: Select at least one file formats supported by the
application and click OK to complete.
19