User Guide
Table Of Contents
- 1. Installing the Button Manager
- 2. Scanning From the Button
- 2.1. Checking the Button Configurations Before Scanning
- 2.2. The Default Button Settings
- 2.3. Scanning From A Simple Touch of the Button
- 2.4 Performing Continuous Scan From the Flatbed
- 3. Configuring the Buttons
- 3.1. A Glance of the Button Properties Window
- 3.2. Choosing New Settings For A Button
- 3.3. Choosing a Proper File Format
- 3.4 Adding A New Destination Application
- 3.5 Deleting A Current Destination Application
- 3.6 Creating A New Scan Configuration
- 3.7 Deleting A Current Scan Configuration
- 3.8 Selecting Options For a Button
- 3.9 Removing a Blank Page
- 3.10 Setting the Power Saving Mode
- 3.11 Saving and Loading Profiles
- 3.12 Solving A Problem
- Index
To load a profile,
1. From the Setting tab in the Button Properties window, click
“Load Profiles”, an Open dialog box appears.
2. Choose the profile which you want to load. (For example,
betsy.abp)
3. Click “Open” to load the profile. Your selected profile
appears on the screen.
Factory Defaults:
Click this button and your existing settings for each button will
be cleared and return to the factory default settings.
Defaults:
Click this button and the settings in both the Options and Setting
tab will return to the default value.
42