User`s manual

User’s Manual
Additional Length Detection
Additional Length Detection allows you to define the length of
document being multi-fed. This value indicates the additional
length exceeding your scan area. The Display window will
show the size of the document as you change the value. A
value of 0 indicates no additional length detection. The
Additional Length Detection is best used when scanning same-
size documents in the auto document feeder.
Intelligent Mode (Skip Multi-Feed) By Ultrasonic
Detection
Some documents which are glued with a photo or a label may
easily be detected as multi-feed yet you wish to bypass these
multi-feed conditions. In this case, you can use the intelligent
mode to let the scanner memorizes and skips these multi-feed
conditions. Choice includes Disable, By
Length(Paper/Object), By Position, By
Length(Paper/Object)+Position.
By Length (Paper/Object): When a multi-feed is detected
for the first time, the scanner memorizes both the length of the
document and the length of the object (photo or label)
attached to the document. When you perform next scanning,
this pattern of multi-feed will be bypassed.
By Position: When a multi-feed is detected for the first time,
the scanner memorizes the position of the photo or label
attached to the document. When you perform next scanning,
this pattern of multi-feed will be bypassed.
4-45