User Guide

8-13
Replacing the Snap-in Pad Module
After scanning approximately 100,000 pages through the ADF, the pad
module may be worn out and you may experience problems with document
feeding. In this case, it is highly recommended to replace the pad module
with a new one. For ordering the pad module, please consult your nearest
dealer and follow the procedure below to replace it.
Disassembling Procedure
1. Pull the Paper Jam Release button.
2. Open the ADF front cover to the left.
3. Press both sides of the ADF snap-in pad module inwardly with your
fingers to pull out the ADF snap-in pad module.
ADF Pad
ADF
Release
Button