User Guide

9-
2
Scanner Operation
1. Start your scanning application.
2. Pull down the File menu and choose Select Source.
If the Select Source command is not available on the File menu, see
your application’s user’s guide to determine how the TWAIN link is
used. A dialog box with a list of scanning sources appears.
3. Select @5100 /32 x.xx.
You need to select the source only once, unless you want o choose
another scanner.
4. Place the document FACE DOWN on the document glass or FACE UP
in the ADF.
5. Pull down the File menu and choose Acquire.
A dialog box containing scanning features appears.
6. Select the scanning method you want to use on the
Scan Method drop-down menu.
7. Select the mode you want to use for your scans on
the Image Type drop-down menu.
8. Select a scanning resolution on the Resolution
drop-down menu.