User Guide

2-3
Unlocking the Scan Unit
The scan unit is locked during transport to protect the scanning mechanism
from being damaged. Be sure to unlock the scan unit before using the
machine.
1). Locate the lock switch at the
left side of the machine.
2). Push the lock switch down to the
“Unlock” position.
Unlocked
Locked
Note:
If you need to move your @V5100 for repair or any other reason,
be sure to lock your @V5100 before moving. To lock your
@V5100, please do the following,
1. Turn off your @V5100.
2. If the scan unit is not located at the front of the glass, turn on the
machine. After the scan unit is returned to the front end, turn off
the machine.
3. Move the lock switch to the “Locked Position”.