User Guide

Configure the Machine
3-8
Specifying Network Configurations
Before @V5100 can be used to distribute document to e-mail addresses, the
network administrator must assign an IP address, subnet mask, gateway,
SMTP, and POP3 to the @V5100. The administrator can assign these
parameters either by using the control panel or using @V5100 web page.
SPECIFYING NETWORK CONFIGURATION BY THE CONTROL PANEL
3. After turning on @V5100, press
to prompt the login dialog.
Note:
The access to the Administrator activities is blocked by the
administrator password. It is recommended that the administrator
create a password before performing these activities. Both Login
and Password are in blank for the default.
4. Enter login name and password or press Select
if the
administrator has not created a new one. Choose Network
Configuration to prompt the Network Configuration screen (see below)
in the LCD-display.
Admin. Login:
Password: