User Manual

EMC Tables
16
The BPM63ZB Arm Type Blood Pressure Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the BPM63ZB Arm Type Blood Pressure
Monitor should assure that it is used in such an environment.
Guidance and manufacturer's declaration-electromagnetic emissions
Emissions test Compliance Electromagnetic environment guidance
RF emissions
CISPR 11
Group 1 The BPM63ZB Arm Type Blood Pressure Monitor uses RF
energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The BPM63ZB Arm Type Blood Pressure Monitor is
suitable for use in all establishments, including domestic
establishments and those directly connected to the public
low-voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not
applicable
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Not
applicable
The BPM63ZB Arm Type Blood Pressure Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the BPM63ZB Arm Type Blood Pressure
Monitor should assure that it is used in such an environment.
Guidance and manufacturer's declaration-electromagnetic immunity
Immunity test IEC 60601
test level
Electromagnetic
environment-guidance
Electrostatic
discharge
(ESD)
IEC 61000-4-2
± 6 kV
contact
± 8 kV air
Floors should be wood, concrete or ceramic tile. If floors
are covered with synthetic material, the relative
humidity should be at least 30 %.
Compliance
level
± 6 kV
contact
± 8 kV air
Power
frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m Power frequency magnetic fields should be at levels
characteristic of a typical location in a typical
commercial or hospital environment.
3 A/m