User Guide

Stealth Coding  Technology

Stealth Coding technology offers the most advanced protection available

against "code-grabbing" devices which thieves may use to record the digital

code transmitted by your remote control. When you leave the area, thieves

can then play back the code to start or stop your system. Avital's remote

controls with Stealth Coding randomly change the code every time you use

them, and your system will not respond if any code is retransmitted. This

technology makes code-grabbing devices useless.

Electronic Scan Prevention (ESP)

Your AviStart system also includes ESP, which blocks electronic scanner codes

preventing unauthorized operation of your system.

Instant Remote Control Code Deletion

In the event of a lost or stolen remote control, all remote controls can be

erased from the system memory preventing unauthorized system operation.

(See the "Programming Table for Remote Controls" on page 9).

One-Step Remote Control Code Learning

The AviStart system allows you to add new remote controls in one step. (See

the "Programming Table for Remote Controls" on page 9).

Valet Switch

The valet switch is a small hidden toggle switch which allows you to control all

of the system programmable features. (See "User-Programmable Features" on

page 9). This switch can only be controlled with the use of your ignition key.

NOTE: Be sure to have your dealer show you where the valet switch is located.

AviStart 3000 Owner's Manual