Models 5305V, 5305P 5305X, 5305A 5305L Owner's Guide
Congratulations Congratulations on the purchase of your state-of-the-art security/keyless entry and remote start system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For more information please visit us online (see back cover for URL). For any additional questions please contact your authorized Directed dealer or Directed at 1-800-753-0600. Additional support is also available at: http://support.directed.
Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose. This product is designed for fuel-injected, automatic transmission vehicles only.
Contents Congratulations .................................................................................................i What’s included.................................................................................................i Important information ........................................................................................ ii Your warranty........................................................................................... ii Replacement Remote controls ........................
Programming the LCD Remote Control ...............................................................24 To enter programming mode: ...................................................................24 To exit programming mode: .....................................................................25 Owner Recognition .........................................................................................26 Rapid Resume Logic .......................................................................................
LCD 2-way Remote Control Feature Description Internal Antenna Used for transmitting and receiving information. Display Displays command response feedback and system states. Command buttons (4) Used to perform arming/locking, disarming/unlocking, auxiliary channel* and remote start** commands. Programming button Located on the back of the remote control, selects the vehicle to control and also provides user selection of LCD remote control response options.
LCD Icons at a Glance 1 2 3 4 5 6 18 17 7 16 15 8 14 9 13 10 12 Item 4 11 Description Item Description 1 Transmit 10 Battery level indicator 2 Out of range 11 Remote start 3 Receive 12 Remote sending 4 Aux channels & alarm zones 13 Vibrate mode 5 Warn away 14 Ignition 6 Audible mode 15 Vehicle number 7 Alarm 16 Door 8 Trunk or Hood 17 Arm 9 Sensor 18 Disarm © 2015 Directed. All rights reserved.
LCD Icon Description Icon Description On during remote command transmission to the vehicle. On during remote command transmission to vehicle, but command page is not received. On during receipt of page from the vehicle to the remote. Displays which auxiliary channel or alarm trigger zone is active. Alarm icon displays when beep notification is turned on and disappears when beep notification is turned off (see "Programming the LCD Remote Control" on page 24 ).
Icon Description Ignition icon flashes a few seconds during full alarm, then remains displayed until page is cleared. Hood icon flashes a few seconds during full alarm, and then remains displayed until page is cleared. Displays the vehicle (1 of 4) that the remote controls. If a Warn Away or alarm trigger occurs at other vehicle, that vehicle number is displayed in the vehicle status. Door icon flashes a few seconds, and then remains displayed until page is cleared.
Basic Commands Note: Button configuration also applies to the 1- way remote control. Arm/Lock Press and release The alarm arms, doors lock (if connected), and the siren/horn sounds and parking lights flash once. If Valet mode* is On, the doors lock with no audio confirmation and the arm/lock indicator** is displayed. Exit Valet mode to arm/lock the alarm normally. Panic Press and hold The alarm Arms (or Locks in Valet) and, after two seconds, sounds the siren/horn and flashes the parking lights.
For optional function (trunk release) Press and hold or Activates the Aux output, such as trunk release or an expansion function that you have added to your system. The auxiliary output controls: . Remote Start Press and release Activates (or if On, deactivates) the remote starter. The engine and parking lights turn On. Note: The factory setting is one press, but this can also be programmed for two presses (See your authorized Directed installer for the amount of presses programmed).
Advanced Commands Note: Button configuration also applies to the 1- way remote control. Additional Auxiliary Functions. Press and buttons simultaneously Activates the optional auxiliary 4 convenience or expansion function that you have added to your system. The auxiliary output controls Press and buttons simultaneously Activates the optional auxiliary 5 convenience or expansion function that you have added to your system.
old isn't met or exceeded, then the remote start does not activate, but will check again later after another three hours have elapsed. Note: The timer mode features are activated and deactivated the same way, with the temperature mode automatically exiting after 18 hours. To activate: 1. Park the vehicle and set the parking brake. 2. Press the and buttons simultaneously. 3. The parking lights flash slowly four times. 4. The remote start activates and runs for the set duration.
Short-run Turbo Mode Press and buttons simultaneously Short-run turbo mode keeps the engine running for a programmable period of time after arriving at your destination (check with your authorized Directed dealer for available run times). This allows the system's timer to conveniently cool down the turbo after you have left the vehicle. To activate: 1. Park the vehicle and set the parking brake. 2. Remove your foot from the brake pedal and leave the engine running. 3. Press the and buttons simultaneously 4.
the button is released the vehicle control indicator will change. While the system is armed, if the Warn Away or full alarm is triggered on any of the programmed vehicles, that vehicle’s number will be displayed and the LCD will display that vehicle’s status. To change back to the original vehicle that was selected press the button for one second and release until the desired vehicle number is shown.
Remote and System Operations Passive Arming/Locking The system can be programmed to arm/lock itself automatically (called passive arming/locking). If the system is programmed for passive arming/ locking, it will automatically arm/lock 30 seconds after the ignition is turned off and the system detects that you have left the vehicle by opening and closing a door.
Triggered Response (security only) A Triggered Response can be activated by any of the triggers listed below and consists of an alarm page along with the response described for each trigger. The default Triggered Response duration is 30 seconds but can be programmed from 1-180 seconds by your installer. • • • • • Shock Sensor Trigger - Heavy impacts to the vehicle will instantly sound the siren/horn and flash the lights for the programmed duration and report Zone 2.
Multi-level Security Arming (security only) Multi-Level Security Arming allows you to select which of the security system’s inputs or sensors are active, or are bypassed when the system is armed (See the "Table of zones" on page 23 of this guide). Press one time to arm the system, siren chirps one time. Pressing again activates Multi-Level Security Arming.
arrived at your destination, the system will disarm when the ignition is turned off. The siren/horn will sound twice and the LED will then stop flashing. The system can also be disarmed at any time by pressing High Security Disarm (security only) High Security Disarm makes it possible to silence and reset the system when it is triggering, without disarming.
Important: The control center button can be programmed to respond from one to five presses for the disarm/disable function. You must check with the installer to verify the programming for your individual unit. Valet Mode You can prevent your system from automatically arming/locking and triggering by using Valet Mode. This is very useful when washing the vehicle or having it serviced.
Remote Start This feature allows you to remotely start and run your vehicle for a programmable period of time. This makes it possible to warm up the engine, as well as adjust the interior temperature of the vehicle with the climate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level prior to remote starting the vehicle.
When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the On position. 2. Press the brake pedal. 3. Disengage the parking brake. 4. Place the vehicle in gear and drive to your destination. Note: If the brake pedal is pressed or the parking brake is disengaged before the key is in the ON position, the engine will shut down.
2. 3. 4. Turn the ignition key to the OFF position, the engine will continue running. Exit and secure the vehicle When returning to the vehicle simply disarm the system and follow the previous "When you are ready to drive the vehicle" information. Note: If you are away from the vehicle for an extended amount of time, the remote start will shut off after the programmed runtime expires or when a shutdown input is received (see the previous Remote Start section for a complete list of shutdown inputs).
NPC is On/Off programmable, except doors are always covered whether on or off. See your dealer and the Programming section of this guide for more information. Arming and disarming the system does not reset this function. In order to reset a bypassed zone, the same zone must not trigger for 60 minutes, or when ignition is turned on. If testing your system, it is important to remember that the NPC programming can cause zones to be bypassed and appear to stop working.
Diagnostics (security only) The microprocessor at the heart of your security system is constantly monitoring all of the switches and sensors that are connected to it. It detects any faulty switches and sensors and prevents them from disabling the entire system. The microprocessor will also record and report any triggers that occurred during your absence. Refer to the System Status Chirps and Table of Zones charts for diagnostic information.
memory, and continues to chirp four or five times each time it is disarmed, until the next time the ignition key is turned on. Table of Zones A zone is represented by the number of control center LED flashes used by the system to identify a particular type of input. Standard input assignments are listed in the following table, along with spaces to write in any optional sensors or switches that have been installed.
Programming the LCD Remote Control To enter programming mode: Press and hold the button on the back of the remote control until one long beep sounds. You can now customize the remote’s response feedback. Note: If no buttons are pressed within five seconds, programming mode is exited; the remote sounds two beeps. Beeps and Vibration, On/Off Press to select beep/vibration On or Off, or one of the below settings.
Page Notification The remote control can notify the user of a page by emitting beeps if the vehicle’s status changes. For example, any vehicle violation such as a door being unlocked. Press to select page On/Off. One beep is page On. Two beeps is page Off. Page notification Response On 1 beep Off 2 beeps Note: When programmed Off, responses are only received when a command from the remote control is performed. However, alarm trigger pages are not received.
Owner Recognition Owner Recognition is a feature available exclusively from Directed. Using the Directed Bitwriter®, a hand-held programming tool, your dealer can program many of the system settings. The programmer makes it possible to program different settings for each remote control that is used with the system. Then, whenever a specific remote control is used, the system will recall the settings assigned to that remote control.
Programming Options Programming options control what your system does during normal operation, and require few or no additional parts. However, some may require additional installation labor. The following is a list of the program settings, with the factory settings in Bold: • Active arming (only with the remote) or passive arming (automatic arming 30- seconds after the last door has been closed).
• Panic mode enabled/disabled with the ignition on: Some states have laws against siren capability in a moving vehicle. • Forced passive arming On or off: If your system is programmed for passive arming and the forced passive arming feature has been programmed on, the system will passively arm after one hour, even if a protected entry has been left open. This feature is useful if a door has been left ajar when leaving the vehicle.
• Full trigger response 30 or 60 seconds: This determines how long the full triggered sequence lasts. Some states have laws regulating how long a security system can sound before it is considered a nuisance. If your installer is programming the security system with the Directed Bitwriter, the full triggered response can be programmed for any duration ranging from 1 to 180 seconds.
Security & Convenience Expansions Listed are some of the many expansion options available. Please contact your dealer to find out about all the convenience options available to you. Audio Sensor: Metal on glass, cracking glass, and breaking glass each produce distinctive acoustic signatures. The 506T audio sensor uses a microphone to pick up sounds, and then using proprietary acoustic software, analyzes the sounds to determine if the glass was struck.
Tilt Sensor: The 507M tilt sensor can be added to your system to protect your vehicle when its parked. An alarm is triggered if the vehicle is lifted, to protect expensive rims. Ultrasonic Sensor: Provides a field of protection inside your vehicle, the 509U Ultrasonic sensor, protects your belongings. © 2015 Directed. All rights reserved.
System Maintenance This system needs no specific maintenance beyond remote control battery replacement. The 2-way remote control is powered by one 1.5V AAA battery. The 1-way remote control is powered by either two 3V, CR2016 batteries or one 3V CR2032 (see back of remote for details). Battery Level Indicator, 2-way The Battery Level indicator has four level indicators that serve as a visual indication of battery charge.
Note Verify that the battery polarity is correct when replacing. Battery Disposal Directed cares about the environment. If you need to dispose of the battery, please do so in accordance with your municipal requirements for battery disposal. Glossary of Terms Document Terminology Control Module (unit) The “brain” of your system. Usually hidden under the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system’s functions.
Document Terminology Input A physical connection to the system. Input may be provided by a sensor, a pin-switch or through an existing system in the vehicle, such as ignition or courtesy lights. LCD Liquid Crystal Display, the screen on the 2-way remote control. It displays the vehicle status using symbols and icons, such as alarm information.
Patent Information This product is covered by one or more of the following United States patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783 Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484 Other patents pending. © 2015 Directed. All rights reserved.
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600. Remote Start Capable When properly installed, this system can start the vehicle via a command signal from the remote control transmitter.
Before remote starting a manual transmission vehicle, be sure to: • Leave the vehicle in neutral and be sure no one is standing in front or behind the vehicle. • Only remote start on a flat surface • Have the parking brake fully engaged WARNING! It is the responsibility of the owner to ensure the parking/emergency brake properly functions. Failure to do so can result in personal injury or property damage.
ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS. This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide.
Limited lifetime consumer warranty Directed Electronics.
IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.
The company behind these Auto Security Systems is Directed. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Quality Directed products are sold and serviced throughout North America and around the world. Call (800) 876-0800 for more information about our products and services. Directed Vista, CA 92084 www.directed.
