User`s guide

PF (PROJECTOR FORWARD)
This cue, used with an Independent
projector designation, will move the
assigned projector tray forward one
position without effecting the lamp
status. If you use PF with a screen
number designation, the system will
assume that you want all projectors in
the screen to move FORWARD one position.
You cannot use both a screen number and
an Independent in one cue.
PR (PROJECTOR REVERSE)
This command functions the same as the
- PROJECTOR FORWARD command except that it
will REVERSE the trays one position.
RPO (REPEAT UNTIL TERMINATED)
This cue is used if an undetermined
number of REPEATS is desired. The RPO
can be terminated by pressing the CUE
(F10) key or using a REMOTE CUE. This
command is of use when you are doing the
"live" portions of your program and the
length of a sequence has not been
predetermined.