User`s guide

run on its own internal clock timer if
the input from the Clock-trak or SMPTE
on tape stops. The AVL GENESIS will
7
display a message warning you that the
input from tape has stopped.
Once a TIME or TIME
X cue has been
executed, the AVL GENESIS will stay in
perfect sync with the time recorded
on
the tape. The system will automatically
execute
a GOTO, if necessary, to
continue tracking with the Clock-trak or
SMPTE from tape. If you stop the tape
and fast forward or reverse the tape,
the system will
GOT0 the correct place
in the program automatically and update
projector lamp and tray statuses.
COM (CLOCK OUTPUT MODE)
This generates Clock-trak or SMPTE from
the OUT
1 jack on the AVL Genesis for
recording on magnetic tape. Normally
the time will begin at time zero.
However, if you want to start
at.a fixed
point in time, you can enter the
starting time (see next command).
COM
HH:MM:SS:FF (CLOCK OUTPUT MODE)
This also generates Clock-trak or SMPTE
from the OUT
1 jack. However, if you
want
to start at a fixed point in time,
you can enter the starting time (hours,
minutes, seconds, and hundredths).
7