User Manual

3. Connect the light unit to the top of the base lever.

4. Connect the rubber lens holder to the top of the light unit.

5. Wash your hands with soap for 20 seconds and dry them with a lint-free towel.

6. Clean the rubber lens holder with a disinfecting alcohol wipe.

a. *Allow the lens holder to dry completely before placing your contact lens

on it.

Please make sure that the light unit is not connected to the

base when suctioning the base to the surface. Leaving the light

unit connected to the base during this step, as shown in the

picture below, will damage the USB charging port of the light