MI-808T Stereo Transmitter User Guide Electronics Co., Ltd. Head office: 814, Pei-Kang Road, Chiayi, 600, Taiwan. Taipei office: 5, Lane 118, Sung-tehRoad, 100, Taipei, Taiwan. Web-http: //www.mipro.com.tw E-mail: mipro@mipro.com.
Index Stereo Transmitter 1. Preface : 1. Preface: 1 2. Features of the MI-808T: 2 Thank you for choosing MIPRO's MI-808T miniature stereo transmitter. This system is engineered to meet the stringent requirements demanded in a variety of pro audio applications, such as by musicians, performers and directors. To get the most out of your system, please read this manual thoroughly. 3. Glossary : 3 4. Operating the MI-808T: 4-8 5.
Stereo Transmitter Stereo Transmitter 2. Features of MI-808T: The MI-808T is a UHF-band stereo transmitter. In each 24 MHz bandwidth there are 16 pre-programmed, user selectable non-interfering frequencies available. The MI-808T employs the latest high-efficiency transmitting circuitry and includes a rugged metal casing which combine to make it the right choice for audio professionals. Features: 1. LCD display panel 2. International EIA standard 1/2-rack metal housing 3.
Stereo Transmitter Stereo Transmitter 4. Operating the MI-808T: 4.Installation of Power Supply 1.Installation of the Antenna Connect the DC 12V~15V/1A power supply to the power input socket. The power supply cable may be fastened to the rear panel to prevent the plug from dislodging. Coaxial cables may be used to remotely locate the transmitting antenna. 5.Transmitter Turn On When power is applied to the MI808T and the power switch is turned on, the green LCD display will glow. 6.
Stereo Transmitter Stereo Transmitter 9.Selecting Stereo or Mono Output 11.Setting the Lock Function a) Press the up/down key to display STEREO/MONO ON/OFF. a) Press the up/down key to display the Lock function. b) Press the left/right key. The display will start blinking. b) c) Press the left key and STEREO will display as being of ON. d) Press the right key and MONO will display as bring ON. Press the left key and the display will show LOCK ON. All settings are now locked.
Stereo Transmitter Stereo Transmitter 13. Rack Installation of Duial MI-808T's 5. Important Notes: A) Single, half-rack transmitter ① Screwtherackmountearsonleftandrightsides.Pleaseseethe illustration below forcorrectassembly.(Fig.5) 1. To avoid interference, monitoring systems and wireless microphone systems should not operate simultaneously using the same frequency band. 2. Use only 50O coaxial cable to connect the transmitters to external antennas and keep the cable length to less than 5 meters.
NOTE﹕ 10 NOTE﹕ 11