User Manual

ManualsBrandsAvlink ManualsAudio accessoriesADD-01HDW

3G-SDI AUDIO

DELAY Conversion

Box

ADD-01HDW

USER MANUAL V1.0

ADD-01HDW

Package Contents-

 1 ADD-01HDW Unit

 1 User manual

 1 Power adapter DC 12V

 2 Screws

 4 foot pads

Any thing missed, please contact with your vendor.

Introduction

The ADD-01HDW connects to the SDI signal from your

source equipment to your SDI receiver.

With the simple interface of ADD-01HDW, the audio delay

time can be adjusted so that sound and picture are

perfectly synchronized. Up to 2700ms (2.7 second) error

can be corrected. The digital audio signal is reproduced

bit-perfect so no loss of audio quality is incurred.

Also the ADD-01HDW can convert the SDI audio sound to

analog or digital.

Features

 Max Audio Delay time 2.7 seconds.

 Audio delay adjustment scale is 10ms.

 Support high-resolution display up to 1080P@60Hz.

 Supports 2-channel PCM analo g audio.

 Supports Coaxial digital audio(P CM only).

Specifications

Input connector 1 x BNC

1 x BNC for video

2 x BNC for audio

Output Connector

1 x RCA

SDI Video support

525i@59.94, 625i@50,

720p@50/59.94/60,

1080i@50/59.94/60,

1080

@23.98/24/25/29.97/30

1080p@50/59.94/60

Audio support

sample rate

48K

Power Adapter (Min.) DC 12V with lock

Housing Metal

Weight 378g

Dimensions (LxWxH) 150x111x25mm

-1-

TOP VIEW

1. Select audio output channel to “Coaxial” and “Analog” audio

output.

2. Display current audio delay time

3. - : decrease time delay value

4. + : increase time delay value

5. CHG: change time unit to adjust the audio delay time.

(second/ 100ms / 10ms)

-2-

Summary of content (2 pages)

PAGE 1
3G-SDI AUDIO DELAY Conversion Box TOP VIEW Introduction The ADD-01HDW connects to the SDI signal from your source equipment to your SDI receiver. With the simple interface of ADD-01HDW, the audio delay time can be adjusted so that sound and picture are perfectly synchronized. Up to 2700ms (2.7 second) error can be corrected. The digital audio signal is reproduced bit-perfect so no loss of audio quality is incurred. Also the ADD-01HDW can convert the SDI audio sound to analog or digital.
PAGE 2
FRONT VIEW 1. Pressing button “CHG” to select time unit “second” to change. Operation Setting the audio delay time 1. Select the time unit to adjust by pressing the button “CHG”. f e d c 1. SDI Input 2. SDI LOOP Output 3. RS232 port 4. Input Power Jack 2. Then the selected time unit LED will keep flash. The user can change to the next time unit by pressing “CHG”. “Second” LED flash. 2. Pressing button “-” once to decrease 1 to 0. Second => 100ms => 10ms => Second… Adjust “second” REAR VIEW 3.