Instruction Manual

BX Matrix Switching Systems—User Manual
26
9.0 BX Matrix System Technical Parameters
Model
Technical Parameters
BX-3088 BX-3084 BX-3044
Video Frequency
Enhancement 0dB
Band Width
250MHz (-3dB)，Full Load
Maximum Transmission
Delay
20nS(±1nS)
Switching Speed 60nS(Longest Time)
Signal Type
RGBHV，RGBS，RGsB，RsGsBs，Composite Video
Video Input
Connector 8 BNC Female
Connectors
8 BNC Female
Connectors
4 BNC Female
Connectors
Signal Strength 1Vp-p Y Composite Video,0.7Vp-p RGB(Computer
Signal)；0.3Vp-p R-Y & B-Y Composite Video
Min./Max. Voltage Modulated Signal 0.5V~2.0Vp-p
Impedance
75Ω
Video Output
Connector 8 BNC Female
Connectors
4 BNC Female
Connectors
4 BNC Female
Connectos
Min./Max. Voltage 2.5Vp-p
Impedance
75Ω
Synchronous Signals
Input/Output Signal Type
RGBHV，RGBS，RGsB，RsGsBs
Input Voltage 0.5V-5.0Vp-p,:4.0Vp-p Normal
Output Voltage AGC-TTL: 5Vp-p,unterminated
Input Impedance
510Ω
Output Impedance
75Ω
Polarization
Positive or Negative（Idential with Input）
Control Type
Serial Control Port
RS-232，9-Pin Female D-sub Port
Baud Rate and Protocol 9600bps, no odd or even calibration address, 8bit
transmission Address, 1bit Stop Address
Serial Control Structure
TX，RX，GND
Control Procedure
《AV Matrix》
Specifications
Power
100VAC~240VAC,50/60Hz，International Auto-Switch