Service manual

28JF-76E

SDA 6000 (IC6001)

• High-speed Synchronous Serial Interface (SSC). Full- and Half-duplex synchronous

up to 16.5 Mbaud

• 3 Independent, HW-supported Multi Master/Slave I

C Channels at 400 Kbit/s

• 16-Bit Watchdog Timer (WDT)

• Real Time Clock (RTC)

• On Chip Debug Support (OCDS)

• 4-Channel 8-bit A/D Converter

• 42 Multiple Purpose Ports

• 8 External Interrupts

• 33 Interrupt Nodes

Display Features

• OSD size from 0 to 2046 (0 to 1023) pixels in horizontal (vertical) direction

• Frame Buffer Based Display

• 2 HW Display Layers

• Support of Double Page Level 2.5 TTX in 100 Hz Systems

• Support of Transparency for both Layers Pixel by Pixel

• User Programmable Pixel Frequency from 10.0 MHz to 50 MHz

• Up to 65536 Displayable Colors in one Frame

• DMA Functionality

• Graphic Accelerator Functions (Draw Lines, Draw and Fill Rectangle, etc.)

• 1, 2, 4 or 8-bit Bitmaps (up to 256 out of 4096 colors)

• 12 bit/16 bit RGB Mode for Display of up to 65535 Colors

• HW-support for Proportional Characters

• HW-support for Italic Characters

• User Definable Character Fonts

• Fast Blanking and Contrast Reduction Output

• Double resolution graphic for interlaced sync rasters (SDA6001 only)

Acquisition Features

• Two Independent Data Slicers (One Multistandard Slicer + one WSS-only Slicer)

• Parallel Multi-norm Slicing (TTX, VPS, WSS, CC, G+)

• Four Different Framing Codes Available

• Data Caption only Limited by available Memory

• Programmable VBI-buffer

• Full Channel Data Slicing Supported

• Fully Digital Signal Processing

• Noise Measurement and Controlled Noise Compensation

• Attenuation Measurement and Compensation

• Group Delay Measurement and Compensation

• Exact Decoding of Echo Disturbed Signals