Manual

Matrix Switcher Series—User Manual
28
6.6.6 Device ID Settings
Device ID Settings
The Device ID determines the position of a Matrix system. When multiple Matrix products
are connected to one PC or when the Matrix products are serially connected, the Device
ID decides which Matrix product is to be controlled. Device ID must not set to same
number. Use the ON/OFF switches 1, 2, 3, 4, 5 on the rear panel to set the ID number as
below:
Number Setting Table
ON/OFF Switching Positions ID Address
（Decimal）
ID Address
（Hexadecimal）
ID
Address
（Binary）
SW5 SW4 SW3 SW2 SW1
0 00 00000 ON ON ON ON ON
1 01 00001 ON ON ON ON OFF
2 02 00010 ON ON ON OFF ON
3 03 00011 ON ON ON OFF OFF
4 04 00100 ON ON OFF ON ON
5 05 00101 ON ON OFF ON OFF
6 06 00110 ON ON OFF OFF ON
7 07 00111 ON ON OFF OFF OFF
8 08 01000 ON OFF ON ON ON
9 09 01001 ON OFF ON ON OFF
10 0A 01010 ON OFF ON OFF ON
11 0B 01011 ON OFF ON OFF OFF
12 0C 01100 ON OFF OFF ON ON
13 0D 01101 ON OFF OFF ON OFF
14 0E 01110 ON OFF OFF OFF ON
15 0F 01111 ON OFF OFF OFF OFF
16 10 10000 OFF ON ON ON ON
17 11 10001 OFF ON ON ON OFF
18 12 10010 OFF ON ON OFF ON
19 13 10011 OFF ON ON OFF OFF
20 14 10100 OFF ON OFF ON ON
21 15 10101 OFF ON OFF ON OFF
22 16 10110 OFF ON OFF OFF ON
23 17 10111 OFF ON OFF OFF OFF
24 18 11000 OFF OFF ON ON ON
25 19 11001 OFF OFF ON ON OFF