User Manual 1x3 Multi-Format Video DA MFS-2213 V.2013MF-2213.
Introduction AVLINK MFS-2213 is high performance multi-format 1x3 distribution amplifier for HDMI / DVI / VGA / Component / Composite / S-Video signals. The MFS-2213 offers flexibility and convenience multi signal interface used. You can then choose any 4 different modules install to MFS-2213. Features 1. I/O modules design 2. Internal universal power supply 3.
HS-13 Module(HDMI) 1. 2. 3. 4. Supports 12-bit Deep Full HD / Full 3D / 4Kx2K video Supports HDCP Can be cascaded DDC copy from port 1 Specifications Function HS-13 HDMI Input Connector (A-Type Female) 1 HDMI Output Connector (A-Type Female) 3 Max. Resolution 4Kx2K@30Hz (8-bit) or 1080p@60Hz (12-bit) Cable Distance (Device to Monitor) 10 m (Max.) Signal Type Standard HDMI Signal DS-13 Module(DVI) 1. 2. 3. 4. 5.
Specifications Function DS-13 DVI Input Connector (DVI Female) 1 DVI Output Connector (DVI Female) 3 Max. Resolution 1600x1200@60Hz Cable Distance (Device to Monitor) 10 m (Max.) Signal Type Standard DVI Signal VS-13MS Module(VGA) 1. 2. 3. 4. 5.
Note: a. If you install the DDC monitor for the Distribution Amplifier, the rest of monitors must be the same resolution as the DDC monitor. b. Even though you are allowed to cascade the Distribution Amplifier with varied ports, the image might become unstable if cascade too many tiers of the Distribution Amplifier. YS-13 Module(Component) 1. 2. 3. 4. 5.
SCS-13 Module(S-Video & RCA Composite) 1. 2. 3. 4. 5.
Specifications Function SBS-13 Video Input Connector 1(4 pin Mini-DIN Female) 1(BNC Female) Video Output Connector 3(4 pin Mini-DIN Female) 3(BNC Female) Input Impedance 75Ω Cable Distance (Device to Monitor) 15 m Signal Type Standard S-Video Signal Standard Composite Signal Note: Even though you are allowed to cascade the Distribution Amplifier with several ports, the image might become unstable if one cascades too many tiers to the Distribution Amplifier. © C&C TECHNIC TAIWAN CO., LTD.
