Owner manual

M
M
M
R
R
R
M
M
M
-
-
-
6
6
6
0
0
0
2
2
2
P
P
P
14
 DIP Switcher: 8 pins DIP and 2 pins DIP switchers for connected configurations. For
more information, refer to 6.5 Ports and Switchers.
8 pins DIP switchers:
- Pin 1~Pin5: ID
- Pin 6: Master/Slave
- Pin 7: RS-232/LAN
- Pin 8: IP RESET
-
2 pins DIP switchers (DIP Switch RS-485 Terminator): RS-485 Terminator for
ON/OFF
 VGA OUT connector: The VGA OUT connector is connected to the Monitor, HDTVs or
other output devices through a VGA cable.
 AUDIO OUT port: This port is connected to the speaker or other audio output devices
 HDMI OUT connector: The MRM-602P Switcher Output connector is connected to the
A/V, HDTVs or other output devices.
 INPUT 1~6 modular cards: The MRM-602P Switcher Input modular cards are
connected to the DVDs, CD players, PS3 or other input sources.
- INPUT1 (VGA + AUDIO)
- INPUT2 (YPbPr + AUDIO)
- INPUT3 (DVI + AUDIO)
- INPUT4~6 (HDMI)
VGA E-DDC host assignment:
Pin # Signal Pin # Signal
1 Red 9 DDC 5V supply
2 Green 10 Sync return
3 Blue 11 Monitor ID bit 0
4 Monitor ID bit 12
Bi-directional data
(SDA)
5 Return (GND) 13 Horizontal sync
6 Red return 14 Vertical sync
7 Green return 15 Data clock (SCL)
8 Blue return