BlueFRITZ! AP-ISDN This manual and the software it describes are protected by copyright. The manual and software as presented are the object of a license agreement and may be used only in accordance with the license conditions. The licensee bears all risk in regard to hazards and impairments of quality which may arise in connection with the use of this product.
Contents 1 1.1 1.2 1.3 1.4 1.5 2 2.1 2.2 2.3 2.4 3 3.1 3.2 3.3 3.4 4 4.1 4.2 5 5.1 5.2 5.3 This Is BlueFRITZ! AP-ISDN 6 What Does BlueFRITZ! AP-ISDN Include . . . . . . . . . . . . . . . . . . . . . . 6 What Was Delivered? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Operation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BlueFRITZ! AP-ISDN LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Instructions Do not open the housing of BlueFRITZ! AP-ISDN. The device contains hazardous components and should only be opened by authorized repair technicians. Never let liquids get inside the BlueFRITZ! AP-ISDN. Otherwise, electric shocks or short circuits may result. Do not install BlueFRITZ! AP-ISDN during an electrical storm or connect or disconnect any cables during an electrical storm. BlueFRITZ! AP-ISDN is intended for indoor use only.
Typographical Conventions The following symbols and highlighting conventions are used in this manual to make reading easier and to emphasize important information. Highlighting The table below explains the highlighting used in this manual. Highlighting Function Example Quotation marks Keys, buttons, icons, tabs, menus, commands “Start / Programs” or “Enter” Capital letters Path and file names in running text SOFTWARE\INFO.PDF OR README.
This Is BlueFRITZ! AP-ISDN 1 This Is BlueFRITZ! AP-ISDN Welcome to the world of wireless ISDN connections via Bluetooth. This manual is your introduction to ISDN communication with BlueFRITZ! AP-ISDN. It contains information about the scope of functions, operation and installation of your BlueFRITZ! AP-ISDN and the accompanying software.
What Was Delivered? 1.2 What Was Delivered? The box contains: the Access Point BlueFRITZ! AP-ISDN one ISDN cable, 0.1 m long one ISDN cable, 6 m long one BlueFRITZ! AP-ISDN CD-ROM containing – FRITZ!X configuration software – documentation for all enclosed AVM products double-sided tape for mounting BlueFRITZ! AP-ISDN on smooth surfaces one BlueFRITZ! AP-ISDN manual (which you’re reading now) 1.
BlueFRITZ! AP-ISDN LEDs The following minimum PC configuration is required for installation of the FRITZ!X configuration software: computer with hard disk, USB port, CD-ROM drive and at least 32 MB of RAM Bluetooth client that supports the ISDN profile CIP; the AVM BlueFRITZ! USB is particularly suited Pentium CPU at 166 MHz or comparable processor Microsoft Windows XP, Me, 2000 Professional or 98 1.
Technical Specifications frequency range 2.402 GHz ~ 2.
Hardware Installation 2 Hardware Installation This chapter describes the installation of the hardware, that is, how to connect BlueFRITZ! AP-ISDN to ISDN and thus also to the power mains. 2.1 Preparing for Installation BlueFRITZ! AP-ISDN can be installed on any suitable horizontal or vertical surface. The unit should be installed in a dry, dustfree location out of direct sunlight. Two cables with different lengths are supplied to connect BlueFRITZ! AP-ISDN.
Working with BlueFRITZ! AP-ISDN 2.3 Working with BlueFRITZ! AP-ISDN To establish a Bluetooth connection from the computer to ISDN, two Bluetooth devices are needed: BlueFRITZ! APISDN, the ISDN access point which you connect to the ISDN line, and another Bluetooth device, the Bluetooth client. The wireless connection is established between the two devices via Bluetooth.
Using Different Bluetooth Profiles For installation instructions and additional information, see the BlueFRITZ! USB manual. Bluetooth connection between BlueFRITZ! USB and BlueFRITZ! AP-ISDN with the CIP profile Modem Profile DUN Bluetooth devices, for instance, some of the PDAs which are equipped with the modem profile “Dial-Up Networking” (DUN), can access BlueFRITZ! AP-ISDN as an ISDN modem.
Using Different Bluetooth Profiles 3. Once the PDA recognizes BlueFRITZ! AP-ISDN as an access point, the login is restricted by means of the 16character passkey printed on the underside of BlueFRITZ! AP-ISDN. 4. If login is successful, a Bluetooth connection is established and displayed by means of the Bluetooth LED on BlueFRITZ! AP-ISDN. 5. Start by accessing a preconfigured ISP and then an Internet browser. The connection to the Internet is dialed automatically.
Using Different Bluetooth Profiles network. If BlueFRITZ! AP-ISDN is installed at a central location, the range between the clients can be nearly doubled. All settings for a network connection with the PAN profile are made automatically during the installation of BlueFRITZ! USB at the client PC. Before establishing a Bluetooth connection, simply select PAN in the client software before connecting to use a network connection with this profile.
Software Installation 3 Software Installation The BlueFRITZ! AP-ISDN package includes configuration software with which you can change the settings of BlueFRITZ! APISDN as an access point. This chapter describes how to install this FRITZ!X configuration software. 3.1 Installing the FRITZ!X Configuration Software Proceed as follows to install FRITZ!X: 1. Insert the installation CD and run the program SETUP.EXE in the SOFTWARE\CONFIG folder. 2.
Program Folder Setup 3.3 Program Folder Setup The Windows “Start” menu now includes a program group “AVM” under “Programs”. This group contains one item: “FRITZ!X” This entry starts the FRITZ!X configuration program. For instructions on using the configuration program, please see the chapter “Configuring BlueFRITZ! AP-ISDN” on page 17. 3.4 Removing the Software To remove the FRITZ!X configuration program, proceed as follows: 1.
Configuring BlueFRITZ! AP-ISDN 4 Configuring BlueFRITZ! AP-ISDN The FRITZ!X configuration software is provided to set up your BlueFRITZ! AP-ISDN access point. This program can be used to change the features of BlueFRITZ! AP-ISDN as an access point. The complete range of functions in the configuration program are available only with a CIP connection between a client and BlueFRITZ! AP-ISDN. This is easiest with the Bluetooth client BlueFRITZ! USB. 4.
Bluetooth is that the user must know the passkey of the ISDN access point, which is printed on the label on the base of the housing. Access Point Here the access point currently in use is displayed, complete with device name, Bluetooth address and features. The device name can be changed here. Settings The settings options on this page allow you to control the Bluetooth client’s use of the access point.
Update Version This settings page contains the version number of the application started when you click the “Bluetooth” button. Update Use this menu to update the PBX software (firmware) to keep your access point up with new technology. For a PBX software update, proceed as follows: 1. Establish a CIP connection to your access point using BlueFRITZ! USB. 2. Start “FRITZ!X” and select the “Update” menu command from the main window. 3. In the text field, enter the path to the update file.
Communication with BlueFRITZ! AP-ISDN 4.2 Communication with BlueFRITZ! AP-ISDN The section illustrated below appears on both settings pages of FRITZ!X. Use the “Apply” button to save the settings made here and load them in BlueFRITZ! AP-ISDN.
Information, Updates and Support 5 Information, Updates and Support AVM provides numerous sources of information to assist you if any questions or problems arise. Whether manuals, FAQs, updates or support – here you will find the important information you need. 5.1 Information Sources Information about all components of BlueFRITZ! AP-ISDN is available here: Documentation Help for FRITZ!X: In all FRITZ!X modules you can open the detailed Online Help by pressing “F1” or clicking the Help button.
Updates Internet To download updates from the Internet, please enter the following URL: www.avm.de/en/download The AVM FTP server can also be used to download current software drivers. The download area of the FTP server can be accessed by clicking the “FTP Server” link or entering the following address: www.avm.de/ftp AVM Data Call Center (ADC) All programs and drivers available from the Internet site can also be obtained from the AVM Data Call Center (ADC).
Assistance from AVM Support 5.3 Assistance from AVM Support Please use the information sources described above before contacting the support. For direct assistance, AVM Support is available to provide help when problems arise during installation and your first steps in operating BlueFRITZ! AP-ISDN. The Support desk can be reached by e-mail or by fax. AVM Support then will contact you to assist in resolving your problem. You will receive an e-mail or a fax.
Assistance from AVM Support Support by Fax If necessary, you can reach AVM Support at the telephone number: +49 (0)30 / 39 00 44 25 Have your Product Identification Code ready when you call. This code is printed on the FRITZ! CD case. Support staff will always check this number to ensure that you are a registered user.
Index A apply settings 20 AVM in the Internet AVM's address 2 F 21 B BlueFRITZ! AP-ISDN configuring 17 different Bluetooth profiles working with 11 Bluetooth passkey 18 Bluetooth profiles 11 CIP 7 11 DUN 7 12 PAN 7 13 SPP 11 11 I C CE symbol 27 channel bundling 11 Common ISDN Access Profile connection to ISDN 10 conventions 5 11 information sources 21 installation configuration software 15 errors 15 hardware 10 preparations 10 installing software 15 Internet 21 ISDN cable 7 ISDN data compression 11 I
P package contents 7 PAN profile joint use of devices 14 network games 14 passkey 18 Personal Area Networking 13 S safety instructions 4 serial profile (SPP) 11 short-hold mode 11 symbols 4 T technical specifications 8 U updates 26 21 BlueFRITZ! AP-ISDN – Index
Declaration of CE Conformity The manufacturer AVM GmbH Address Alt-Moabit 95 D-10559 Berlin herewith declares that the product Type ISDN Access Point Product BlueFRITZ! AP-ISDN complies with the following directives: 1999/5/EEC R&TTE Directive: Radio Equipment and Telecommunications Terminal Equipment 89/336/EEC EMC Directive: Electromagnetic Compatibility 73/23/EEC Low Voltage Directive: Electrical equipment designed for use within certain voltage limits The following norms were consulted to
