Operation Manual

Removing Software in Windows 2000
36 BlueFRITZ! AP-X – 4 Removing Software Components
Rebooting the computer concludes the uninstallation.
4.3 Removing Software in Windows 2000
Proceed as follows to remove the BlueFRITZ! AP-X driver soft-
ware in Windows 2000:
1. Open the system properties of Windows by clicking
through “Start / Settings / Control Panel / System” and
select the “Device Manager” button on the “Hardware”
settings page.
2. In the “Network adapters” section of the Device Manag-
er, select the “BlueFRITZ! AP-X” entry.
3. In the “Action” menu, select the “Uninstall...” com-
mand.
4. Confirm the uninstallation in the following security
prompt. BlueFRITZ! AP-X will be removed.
This completes uninstallation of the driver software of Blue-
FRITZ! AP-X in Windows 2000.
Proceed as follows to remove the software components in
Windows 2000:
1. Select “Start / Settings / Control Panel”, then double-
click the “Add/Remove Programs” icon.
2. Make sure that the “Change or Remove Programs” but-
ton is selected in the column at left.
3. The installed components are found in the list of in-
stalled software. The software components of AVM
BlueFRITZ! AP-X are identified in the list of installed
software by these names:
– AVM FRITZ!
– AVM FRITZ!X
– AVM ISDN CAPI Port
4. Select the software component you want to remove.
5. Click the “Change/Remove” button.