Operating instructions

2.5 Setting of the phono card (option)

To ensure that the phono card works in an optimal way, it must be set according to the requirements of the

cartridge. Please refer to the operating manual / technical data of your cartridge to find out the correct

settings. The setting is done by switches on the pcb. The upper switches are for the right channel, the lower

for the left channel. The switches for both channels must be set identically.

S2r S3r S4r S5r

S5lS4lS3lS2lS1

S1/1+2 S2/1 S2/2 S3/1 S3/2 S4/1 S4/2 S5/1 S5/2

MM-cartridges

OFF OFF OFF OFF OFF

Output voltage

< 1 mV ON ON

1 mV – 2,5 mV OFF ON

2,5 mV - 5 mV ON OFF

> 5 mV OFF OFF

Load capacitance

up to 200 pF OFF OFF

200 - 350 pF ON OFF

350 - 450 pF OFF ON

450 - 600 pF ON ON

S1/1+2 S2/1 S2/2 S3/1 S3/2 S4/1 S4/2 S5/1 S5/2

MC-cartridges

ON ON ON OFF OFF

Output voltage

< 100 µV ON ON

100 µV - 250 µV OFF ON

250 µV - 500 µV ON OFF

> 500 µV OFF OFF

Load resistance

25 - 75 Ohms ON ON

75 - 150 Ohms ON OFF

150 - 500 Ohms OFF ON

> 500 Ohms OFF OFF