Operation Manual

FRITZ!Box Fon WLAN 7570 vDSL 128
More about Network Settings
3 More about Network Settings
FRITZ!Box and Networks
The FRITZ!Box is delivered with preconfigured network settings. Accord-
ing to these settings, all computers connected with the FRITZ!Box are lo-
cated in the same subnetwork.
You can change any of these preconfigured settings, but
should only do so if you are well versed in networking tech-
nology.
 The Glossary (see the chapter “Glossary” from
page 142) explains concepts and terminology having
to do with IP networks.
 The sections “IP Address” on page 129, “DHCP Server”
on page 131 and “Subnetwork” on page 133 explain
when it may make sense to change the preconfigured
network settings, what the effects of these changes
are, and how to make the changes.
Upon delivery, the network settings of the FRITZ!Box are
preconfigured as follows:
If you do not have much experience in setting up networks,
please read this chapter in full.
Factory Settings
All computers are located in the
same IP network
enabled
IP address 192.168.178.1
Subnet mask 255.255.255.0
DHCP server enabled