Operation Manual

FRITZ!Box Fon WLAN 7570 vDSL 132

Fixed IP Addresses when the DHCP Server Is Enabled

If you would like to give fixed IP addresses to individual

computers connected with the FRITZ!Box, despite the fact

that the DHCP server is enabled, then you must disable the

option “Obtain an IP address automatically” in this com-

puter’s network settings and enter the fixed IP address

manually in the appropriate fields.

Which IP Addresses Can You Assign to the Computers?

 The IP addresses must be from the same subnet as

FRITZ!Box.

 The IP addresses may not come from the address pool

of the DHCP server.

If the factory settings are not changed, that means the fol-

lowing IP addresses are available:

Each IP address can be assigned only once.

Disabling the DHCP Server

You can switch off the DHCP server.

To make sure that all computers remain in the same subnet

as the FRITZ!Box even when the DHCP server is disabled,

you must enter the IP addresses manually in the comput-

er’s network settings. First disable the option “Obtain an IP

address automatically” and then enter the IP address man-

ually in the appropriate field.

The computers can receive their IP addresses from the

DHCP server only if the setting “Obtain an IP address auto-

matically” is enabled in the their IP settings. For more infor-

mation, see the section “IP Settings” from page 102.

192.168.178.2 - 192.168.178.19

192,168,178,201 - 192.168.178.253