Operation Manual

Changing the DHCP Server Settings
FRITZ!Box Fon WLAN 7570 vDSL 133
In the case of the preset IP address of the FRITZ!Box, the fol-
lowing IP addresses are available for assignment to the
computers:
Each IP address can be assigned only once.
Changing the DHCP Server Settings
Proceed as follows to open the DHCP server settings:
1. Start a web browser on your computer.
2. Enter fritz.box
in the address line of the browser.
3. Select the “Advanced Settings / System” menu in the
“Settings” area.
4. Click “Expert Mode” in the “System” menu, enable the
setting “Show expert settings” and confirm this set-
ting by clicking “Apply”.
5. Open the “System / Network Settings” menu.
6. Click the “IP Addresses” button.
The “IP Settings” page is opened. Here you can make the
settings for the DHCP server.
3.3 Subnetwork
By default the option “All computers are located in the
same IP network” is enabled in the FRITZ!Box.
If the factory settings were not changed, this setting has the
following effect:
192.168.178.2 - 192.168.178.253
Factory Settings
All computers are located in the
same IP network
enabled
IP address 192.168.178.1
Subnet mask 255.255.255.0
DHCP server enabled