Operation Manual

Connecting the Computer(s)
FRITZ!Box Fon WLAN 7570 vDSL 17
1. Connect the power supply unit to the socket on the
FRITZ!Box labeled “Power”.
2. Plug the other end into an AC power outlet.
The green “Power/DSL” LED will begin flashing after a few
seconds.
3.4 Connecting the Computer(s)
If you would like to surf the web using the FRITZ!Box or to
open the FRITZ!Box user interface, then you must connect a
computer with the FRITZ!Box.
A computer can be connected with the FRITZ!Box in two dif-
ferent ways:
 via a LAN port
 wirelessly via WLAN
Connection
Scenarios
Note the following when connecting computers to the
FRITZ!Box:
 One computer can be connected to the FRITZ!Box by
only one of these means.
 At each of the network ports of the FRITZ!Box, a com-
puter can be connected directly or via a hub/switch.
 Using WLAN you can connect multiple computers with
the FRITZ!Box at the same time.
 The computer is connected to the FRITZ!Box in the
same way regardless of the operating system on the
computer.
 All of the computers connected with the FRITZ!Box
constitute a network.