Operation Manual

FRITZ!Box Fon WLAN 7570 vDSL 22
Using WLAN adapters from Other Manufacturers
3. Confirm your entries using the relevant button in the
user interface (for instance, “OK” or “Connect”).
Now your WLAN adapter and the FRITZ!Box are connected
with each other wirelessly.
Please see the instructions in the section “Opening the Us-
er Interface” on page 29. See also the information on WLAN
security in the section“Security” from page 122.
WPA Not
Supported
If your WLAN adapter does not support WPA, you must con-
vert the encryption in the FRITZ!Box to WEP. For this you
must change the WLAN settings in the FRITZ!Box. To do so,
proceed as follows:
1. Connect the FRITZ!Box and the computer using the
network cable (yellow) (see the section “Connecting
Computer(s) to the LAN Port” on page 18).
2. Start a web browser on the computer.
3. Enter fritz.box
in the address line of the browser.
4. Select the “Advanced Settings / WLAN / Security”
menu in the “Settings” area.
5. Then select WEP encryption and enter a network key.
6. Click the “Apply” button.
A window is displayed with the WLAN security settings.
7. Print out the page by clicking the printer icon in the
toolbar.
SSID (name of the
WLAN radio network)
FRITZ!Box Fon WLAN 7570 vDSL
Encryption method WPA (TKIP) or WPA2 (AESCCMP)
Encryption WPA PSK
Key The key is printed on the stickers on
the base of the device and on the
cover of the FRITZ!Box CD.
Network mode Infrastructure