Operation Manual

Disabling the USB Remote Connection
FRITZ!Box Fon WLAN 7570 vDSL 45
7. Open the “USB Remote Connection” menu and install
the program for the USB remote connection on the
computer from which you want to use the USB de-
vices. Follow the instructions on the “USB Remote
Connection” page.
The program can be implemented in Windows Vista
(32-bit) and Windows XP (32-bit) with Service Pack 2
or higher.
8. The next step is to specify for which kind of USB de-
vices the USB remote connection should be enabled.
Enable the desired options.
9. As a final step, click “Apply”. All USB devices con-
nected to the FRITZ!Box will be detected again.
The result of the changed USB settings can be viewed in the
“Overview of Devices”.
Disabling the USB Remote Connection
Perform the following steps to disable the USB remote con-
nection:
1. Open a web browser on the computer for which the
USB remote connection is to be disabled.
2. Enter fritz.box
in the address line of the browser.
3. Select the “Advanced Settings” menu in the “Set-
tings” area.
4. Enable the expert mode option of the FRITZ!Box in the
“System / Expert Mode” menu. Confirm by clicking
“Apply”.
5. Open the “USB Devices / USB Remote Connection”
menu.
6. Disable all types of USB devices.
7. As a final step, click “Apply”.
The result of the changed USB settings can be viewed in the
“Overview of Devices”.