Operation Manual

Do Not Disturb
FRITZ!Box Fon WLAN 7570 vDSL 59
Do Not Disturb
You can enable the Do Not Disturb function for any tele-
phone connected to FRITZ!Box in the user interface. When
Do Not Disturb is enabled, the telephone will not ring. In
configuring this function you can choose between enabling
the function immediately and selecting a specific time peri-
od.
Immediately When Do Not Disturb is enabled immediately, no incoming
calls will be signaled at the specified extension. The Do Not
Disturb setting will remain enabled until it is disabled.
Period Alternatively, you can enter a Do Not Disturb period during
which the telephone will not ring. At the extension for
which a Do Not Disturb period is to be configured, define
the period during which the phone should not ring and
save your entries. Then enable Do Not Disturb. Do Not Dis-
turb then automatically will be switched on daily at the time
entered in the “Start” field and switched off again at the
time defined in the “End” field.
Example: Do Not Disturb should be configured from
08:00 p.m. until 07:00 a.m. daily. Enter the value “2000”
for <Start> and “0700” for <End>.
Disabling the
Function
Both kinds of Do Not Disturb settings can be disabled by
means of a keypad sequence.
Enable Do Not Disturb Effective Immediately
r81<Ext.>s0s immediately enables Do Not Disturb for
the extension entered as <Ext.>
Enable Do Not Disturb for a Prescribed Period
r80<Ext.>s
<Start>s<End>s
defines the period for Do Not Disturb at
extension <Ext.>
r91ss saves the settings
r81<Ext.>s6s enables Do Not Disturb for the defined pe-
riod