Operation Manual

FRITZ!Box Fon WLAN 7570 vDSL 98

Enabling WLAN

The wireless network of the FRITZ!Box is not found by the

WLAN adapter.

WLAN is not enabled in the FRITZ!Box. If the “WLAN” LED on

the FRITZ!Box is not lit up or is flashing, this means that

WLAN is not enabled.

Press the WLAN button on the FRITZ!Box. The “WLAN” LED

begins flashing and then remains lit. This means that the

WLAN function is enabled.

Announcing the Name of the Radio Network

The WLAN Adapter cannot find the wireless network of the

FRITZ!Box.

The name of the wireless network of the FRITZ!Box is con-

cealed.

Enable the setting “Announce name of the radio network

(SSID)” in the WLAN settings of the FRITZ!Box.

1. Connect the FRITZ!Box to a computer using a network

cable. Proceed as described in the section “Connect-

ing Computer(s) to the LAN Port” on page 18.

2. Start a web browser.

3. Enter fritz.box

in the address field.

4. Select the “Settings” menu.

5. Select the “Advanced Settings / WLAN / Radio Set-

tings” menu and enable the setting “Announce name

of the radio network (SSID)”.

Possible Cause

Remedy

Possible Cause

Remedy