FRITZ!Fon C4 avm.de/en © AVM GmbH · Alt-Moabit 95 · 10559 Berlin · Germany · Telephone +49 30 39 97 6-0 · info@avm.
Table of Contents Important Instructions . . . . . . . . . . . . . . . . . . . . . 6 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Note for Hearing Aid Users . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Prerequisites for Operating FRITZ!Fon . . . . . . . . . . . . . . . . . 6 2 Starting Operation of the FRITZ!Fon . . . . . . . . . . 10 2.1 2.2 2.3 2.4 Inserting the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.8 3.9 3.10 3.11 Muting the Microphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Locking Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Paging a Mislaid FRITZ!Fon . . . . . . . . . . . . . . . . . . . . . . . . . 18 Connecting a Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4 Entering Telephone Numbers . . . . . . . . . . . . . . . 20 4.1 4.2 Assigning Telephone Numbers in the FRITZ!Box . . . . . . . .
7 Switching the Alarm On and Off . . . . . . . . . . . . . 38 7.1 7.2 Setting Up the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Switching the Alarm On and Off . . . . . . . . . . . . . . . . . . . . . 39 8 Configuring the Baby Monitor . . . . . . . . . . . . . . . 40 9 Internet Services . . . . . . . . . . . . . . . . . . . . . . . . . 41 9.1 9.2 9.3 9.4 Receiving and Sending E-mail. . . . . . . . . . . . . . . . . . . . . . . 41 Receiving RSS Feeds . . . . . . . . . . . .
13 Operating Devices in the Home Network . . . . . . 58 13.1 13.2 13.3 Switching the FRITZ!Box Wireless Network On and Off . . . 58 Switching Smart Home Devices On and Off . . . . . . . . . . . . 58 Using FRITZ!Fon as a Media Player . . . . . . . . . . . . . . . . . . . 59 14 Writing Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 15 Technical Specifications . . . . . . . . . . . . . . . . . . . 62 16 Customer Service. . . . . . . . . . . . . . . . . . . . . . . . . 63 16.1 16.
Important Instructions Safety Instructions When working with the FRITZ!Fon, follow the instructions below to protect yourself and the device from damage. • Never let liquids get inside the FRITZ!Fon. Otherwise, electric shocks or short circuits may result. • Protect the FRITZ!Fon from direct sunlight. Note for Hearing Aid Users If you wear a hearing aid, FRITZ!Fon can cause unpleasant noises. These are caused by radio signals coupled into the hearing aid.
FRITZ!Fon C4 at a Glance 1 FRITZ!Fon C4 at a Glance FRITZ!Fon C4 is a cordless telephone with which you can make telephone calls on the Internet and the fixed-line network. FRITZ!Fon was developed especially for the FRITZ!Box, but can be used with other DECT base stations. Telephone calls over the Internet can be conducted with FRITZ!Fon in HD to enjoy natural sound quality. FRITZ!Fon supports DECT Eco “No Emission”.
Getting to Know the FRITZ!Fon 1.
Icons on the Display 1.
Starting Operation of the FRITZ!Fon 2 Starting Operation of the FRITZ!Fon 2.1 Inserting the Battery 1. Place a coin in the slot at the bottom of FRITZ!Fon. Rotate the coin until the battery cap pops open and take off the battery cap. 2. Insert the battery. The conductors of the battery must be in contact with the conductors in the housing. 3. Close the battery compartment.
Charging the Battery 2.2 Charging the Battery 1. Connect the power supply unit to the charging station. 2. Plug the other end into a power outlet. 3. Place the FRITZ!Fon in the charging station. The battery will be charged. 2.3 Registering FRITZ!Fon with the Base Station Register your FRITZ!Fon with your FRITZ!Box or another DECT base station. Registering with the Base Station 1. To switch on FRITZ!Fon, press and hold down the hang up button .
Registering FRITZ!Fon with the Base Station 2. Press the “DECT” or “Registration” button on your base station. Press and hold the button until FRITZ!Fon requests a PIN or is successfully registered. 3. If the PIN of the base station is requested, enter the PIN and press “OK”. In all FRITZ!Box models the PIN is preset to “0000”. FRITZ!Fon registering with the base station.
Registering FRITZ!Fon with the Base Station Switching Base Stations If FRITZ!Fon is registered at multiple base stations, you can switch base stations as follows: 1. Press the menu key . 2. Select “Settings / OK / Registration / OK / Register / OK”. 3. Select a base station and press “OK”. FRITZ!Fon connects to the base station. Deregistering from a Base Station If you no longer use one of the base stations, deregister FRITZ!Fon from that base station. 1. Press the menu key . 2.
Navigating in the Menus 2.4 Navigating in the Menus The functions of FRITZ!Fon are operated using a menu, which has a main menu and several submenus. With the control ring and the left display key up, down and back through the menus. you can navigate Select functions using the “OK” button or the right display key Back Select / OK Up Back Down FRITZ!Fon C4 FRITZ!Fon MT-D Select / OK 14 14 .
Making Telephone Calls 3 Making Telephone Calls 3.1 Function Keys for Making Telephone Calls Internal calls Hands-free calling Call list Call key / Redialing Hang up key Telephone book 3.2 3.3 Dialing Numbers 1. Enter a telephone number. 2. Press the call key .
Enabling Direct Pickup 3.4 Enabling Direct Pickup If the “Direct pickup” function is enabled, FRITZ!Fon accepts a call immediately as soon as you take FRITZ!Fon out of the charging station. 1. Press the menu key . 2. Select “Settings / OK / Telephony / OK / Pick up directly”. 3. Press the display key “On”. Direct pickup is enabled. 3.5 Adjusting the Volume The volume of a call can be adjusted during calls with the handset and hands-free calls.
Switching on Hands-Free Calling Switching Off Ringer for a Call Press the and hold it down until the telephone stops ringing. You can pick up the call now or wait until the caller hangs up. The next time a call arrives FRITZ!Fon will ring again. 3.7 Switching on Hands-Free Calling To switch on hands-free calling, press the Hands-Free Calling button before or during a telephone call. Press the Hands-free calling key ation. 3.
Paging a Mislaid FRITZ!Fon To unlock the keys, press the on the display. until “Keypad unlocked” appears Enabling Active Keylock The active keylock is a setting in the “Settings / Telephony” menu. This setting determines whether the keys remain locked when you pick up a call while the keylock is enabled. If you disable active keylock (preset), you can use FRITZ!Fon’s keypad for the duration of the call. When you enable the active keylock, the keypad remains locked. 3.
Connecting a Headset 3.11 Connecting a Headset Suitable Headsets The headset must meet the following specifications: • Headphone impedance: 32 ohms • Microphone impedance: 800 ohms – 2.2 kOhm • 3.5 mm jack, assignment (stereo / mono): Right Left Microphone Ground audio signal audio signal Microphone Ground Audio signal Connecting a Headset Connect the headset to the headset socket. The headset is now ready for operation.
Entering Telephone Numbers 4 Entering Telephone Numbers If you have more than one telephone number, you can assign your FRITZ!Fon telephone numbers for outgoing and incoming calls. The telephone number for outgoing calls is the one your FRITZ!Fon uses when you call someone. The telephone numbers for incoming calls are the ones at which your FRITZ!Fon can be reached. Telephone numbers are assigned to your FRITZ!Fon in the DECT base station. 4.
Selecting a Telephone Number before a Call 4.2 Selecting a Telephone Number before a Call If FRITZ!Fon is registered with a FRITZ!Box, you can select a telephone number before you place a call. If you do not select a telephone number, the number you assigned to FRITZ!Fon in the FRITZ!Box will be used. Prerequisites This is how FRITZ!Fon must be set up in the FRITZ!Box user interface: • For incoming calls the option “React only to the following numbers” must be enabled.
Using the Telephone Book and Call Lists 5 Using the Telephone Book and Call Lists If you use a FRITZ!Box that supports DECT as a base station, you can use the telephone book and the call lists of the FRITZ!Box on the FRITZ!Fon. 5.1 Setting Up a Telephone Book in FRITZ!Box In the default setting the FRITZ!Fon uses the first telephone book of the FRITZ!Box. You can also use a different telephone book on your FRITZ!Fon. The telephone book must be configured in the FRITZ!Box first.
Calling a Telephone Number from the Telephone Book Selecting a Telephone Book in FRITZ!Fon If you have set up multiple telephone books in your FRITZ!Box, you can select a telephone book on the FRITZ!Fon. 1. Press the bottom of the control ring . The telephone book is opened. 5.2 2. Press the display key “Options”. 3. Select “Change Phone Book / OK”. 4. Select a telephone book and click “OK”. Calling a Telephone Number from the Telephone Book You can make calls from the telephone book: 1.
Calling a Telephone Number from the Call List 5.3 Calling a Telephone Number from the Call List You can make calls from the call lists: 1. Press the key and select a call list. or Press the call key 2. Select an entry. 3. Press the call key to open the redial list. . The call will be connected. 5.4 Changing or Adding a Telephone Number Telephone numbers from the telephone book and the call list can be changed or extended before dialing. For example, you can add an extension: 1.
Searching in the Telephone Book 4. Select “Use” and press “OK”. If the entry has more than one telephone number, select one telephone number. The telephone number appears on the display. The cursor blinks after the last numeral. 5. Change or add to the telephone number. 6. Press the call button . The call will be connected. 5.5 Searching in the Telephone Book Finding and Calling a Telephone Number 1. Press the bottom of the control ring . The telephone book is opened. 2.
Saving New Telephone Book Entry Enabling the Simplified (Vanity) Telephone Book Search When you enable the simplified telephone book search, it is no longer necessary to press keys multiple times. By pressing the “5” key, for instance, you can view all of the entries that begin with “J”, “K”, or “L”. Without the simplified telephone book search you have to press twice for “K” and three times for “L”. 1. Open the user interface of the FRITZ!Box in a web browser (http://fritz.box). 2.
Saving Numbers from the Call List 5.7 Saving Numbers from the Call List A telephone number from a call list can be saved to the telephone book: 1. Press the and select a call list. 2. Select a telephone number. 3. Press the display key “Options” and select “Copy”. 4. Select “New Entry / OK”. 5. Enter a name. 6. Select “Home”, “Office” or “Mobile”. 7. Press the display key “Paste”. The telephone number from the call list is added. 8. Press the display key “Save”.
Convenience Functions for Telephone Calls 6 Convenience Functions for Telephone Calls With FRITZ!Fon you can use convenience functions provided by your base station for telephone calls. FRITZ!Fon offers its full range of functions when the base station is a DECT-ready FRITZ!Box and both devices have the latest firmware installed. For more information, read Updating the Firmware on page 57. You can also register FRITZ!Fon with DECT base stations from other manufacturers.
Answering Machine Setting Up an Answering Machine in FRITZ!Box 1. Open the user interface of the FRITZ!Box in a web browser (http://fritz.box). 2. Select “Telephony / Answering Machine”. 3. Click the link “Another answering machine”. 4. Specify the mode, greeting delay and recording length. In the “Greeting only” mode, callers cannot leave you any messages. 5. Enter a name for the answering machine and confirm by clicking “Next”. 6.
Answering Machine Recording a Greeting You can use the start and end announcements on the answering machine or record your own announcements: 1. Press the menu key . 2. Select “Answering Machine / OK”. 3. Press the display key “Options” and select “Settings / OK”. 4. Select an operating mode and press “Options”. 5. In the operating mode “With recording”, you select “Start greeting” and press “OK / Record / OK”. In the operating mode “Greeting only”, you select “Record / OK”. 6.
Answering Machine Playing Back Messages When new messages are waiting, the messages key on FRITZ!Fon flashes red. To play back all new messages, press and hold down the answering machine key . To select a message, press the messages key message is at the top of the list. . The most recent To listen again to messages you have already heard, select “Call list / OK / Messages / OK” in the menu. Deleting Messages 1. Press and hold the . 2. Select a message and then press “OK”. 3. Select “Delete / OK”.
Answering Machine Listening In as New Messages Are Recorded You can use FRITZ!Fon’s loudspeaker to listen when the answering machine records a new message. Enable the “Listen in” function: 1. Open the user interface of the FRITZ!Box in a web browser (http://fritz.box). 2. Select “DECT / Cordless Telephones”. 3. Click the “Edit” button 4. On the “Telephony Device Features” tab, enable the “Listen in on the answering machine” setting. 5. Click “OK”. for FRITZ!Fon.
CLIR for One Call (Case by Case) 6.3 CLIR for One Call (Case by Case) When making a call you can ensure that the party called does not see your telephone number. For this you can suppress the telephone number for a single call. This function is also known as CLIR (Calling Line Identification Restriction). 1. Press the display key “Favorites” and select “Anonymous call / OK”. or Press the menu key and select “Settings / OK / Telephony / OK / Anonymous call / OK” 2. Press the display key “On”.
Alternating Between Calls 6.4 Alternating Between Calls While you are on the phone you can call a second party and switch (alternate) between the two calls as often as desired. 1. Make a call or pick up a call. 2. Press the display key “R” (consultation). The first call is on hold. 3. Make the second call: Press the telephone book key “OK”. , select an entry, and press or Enter an external telephone number. or Press the left of the control ring press “OK”. 4.
Establishing a Three-Party Conference Call 6.5 Establishing a Three-Party Conference Call Three parties can confer with each other in real time in a three-party conference call. Two external and one internal party, or two internal and one external party can participate in the three-party conference call. 1. Make a call or pick up a call. 2. Press the display key “R” (consultation). The first call is on hold. 3. Make the second call: Press the telephone book key “OK”.
Configuring Call Diversion 6.6 Configuring Call Diversion Call diversion forwards incoming calls, for instance, to your mobile telephone.
Configuring Call Diversion Switching Call Diversion On and Off A call diversion setting configured for FRITZ!Fon can be switched on and off on the FRITZ!Fon. 1. Press the menu key 2. Select “Supplementary services / OK / Call diversion / OK”. 3. Select a call diversion setting. 4. Press the display key “On” or “Off”. 5. Press the hang up key FRITZ!Fon C4 FRITZ!Fon MT-D . .
Switching the Alarm On and Off 7 Switching the Alarm On and Off If your FRITZ!Fon is registered with a FRITZ!Box, you can configure up to three different alarms. 7.1 Setting Up the Alarm 1. Press the menu key . 2. Select “Supplementary services / OK / Alarm / OK”. 3. Select an alarm. 4. Press the display key “Options”. 5. In the “New alarm time” menu, set the time for the alarm to ring and press “OK”. 6. Select your FRITZ!Fon in the “Telephone” menu and press “OK”. 7.
Switching the Alarm On and Off 7.2 Switching the Alarm On and Off 1. Press the menu key . 2. Select “Supplementary services / OK / Alarm / OK”. 3. Select an alarm. 4. Press the display key “Options”. 5. Select “Alarm on / OK” or “Alarm off / OK”. The alarm is turned on or off.
Configuring the Baby Monitor 8 Configuring the Baby Monitor If your FRITZ!Fon is registered with a FRITZ!Box, you can configure the FRITZ!Fon as a baby monitor. FRITZ!Fon will then call a specified telephone number whenever the ambient noise reaches a defined level. 1. Press the menu key . 2. Select “Supplementary services / OK / Baby monitor / OK / Destination no. / OK”. 3. Enter a telephone number and press “OK”. or Delete all of the numerals already entered.
Internet Services 9 Internet Services If your FRITZ!Fon is registered with a FRITZ!Box, with FRITZ!Fon you can read and write e-mail, read RSS feeds, and listen to podcasts or web radio. 9.1 Receiving and Sending E-mail With FRITZ!Fon you can receive and send e-mail when your computer is switched off. In the FRITZ!Box you can set up up to ten e-mail accounts for this purpose.
Receiving and Sending E-mail Reading E-mail Opening E-mail 1. Press and hold the key. The “Internet services” menu is opened. 2. Select “E-mail / OK”. 3. If more than one e-mail account is set up, select an e-mail account and press “OK”. 4. Select an e-mail and press “OK”. The e-mail appears on the display. Navigating in E-mail With the control ring you can navigate up and down in an e-mail message and skip to the next or the previous e-mail.
Receiving and Sending E-mail Sending E-mail 1. Press and hold the key. The “Internet services” menu is opened. 2. Select “E-mail / OK”. 3. If more than one e-mail account is set up, select an e-mail account and press “OK”. 4. Press the display key “Options” or “New”. 5. Select “New e-mail / OK”. 6. Write the subject line and the text. For more on writing text, read page 60. 7. Press the display key “Options”. 8. Select a recipient from the telephone book and press “OK”.
Receiving RSS Feeds 9.2 Receiving RSS Feeds You can read RSS feeds with FRITZ!Fon. RSS is a format for rendering headlines and what are usually short items on certain subjects. These could be, for instance, the latest headlines or information about changes on the provider’s website. Configuring RSS Feeds RSS feeds provide RSS messages. Configure the RSS feeds you would like to receive with FRITZ!Fon in the FRITZ!Box: 1. Open the user interface of the FRITZ!Box in a web browser (http://fritz.box). 2.
Listening to Podcasts 4. Select an RSS message and then press “Show”. The RSS feed appears on the display. Navigating in RSS Feeds Use the the control ring to navigate upward and downward in the message and to skip to the next or the previous message. With the “OK” key you can page forward and skip to the next message. Rotate Display With the key you can rotate the display: Press once to rotate the display by 90°. Press twice to rotate the display by 270°. Press three times to reset the display. 9.
Listening to Web Radio 3. Select a preset podcast from the drop-down list, or select “Other podcast” and configure a new podcast. The Help of the FRITZ!Box user interface presents comprehensive information on all of the settings for podcasts. Playing a Podcast 1. Press and hold the key. The “Internet services” menu is opened. 2. Select “Podcasts / OK”. 3. If more than one podcast is configured, select a podcast and press “OK”. 4. Select an entry and then press “OK”.
Listening to Web Radio Setting Up a Web Radio Station Configure the radio stations you would like to listen to with FRITZ!Fon in the FRITZ!Box: 1. Open the user interface of the FRITZ!Box in a web browser (http://fritz.box). 2. Select “Home Network / Media Server / Web Radio”. 3. Select from the drop-down menu a preselected web radio station, or select “Another Web Radio Station” and set up a new radio station. The radio station must use the “pls”, “m3u” or “mp3” format.
Opening New Messages 10 Opening New Messages If new messages are available, the notification key flashes, and the “New Messages” icon appears in the display. Messages are: • missed calls • new firmware updates • new messages on the answering machine • new e-mail, podcasts and RSS feeds Here is how to open new messages: 1. Press . 2. If different kinds of messages have arrived, for instance “Missed calls” and “E-mail”, select one kind of message and press “OK”. 3.
Configuring FRITZ!Fon 11 Configuring FRITZ!Fon 11.1 Configuring the Start Screen Instead of the preset start screen you can set up your own background image or configure a clock as the start screen. Selecting a Start Screen 1. Press the menu key . 2. Select “Settings / OK / Display / OK / Start screen / OK”. 3. Select a start screen and press “OK”. Assigning a Background Image If you selected the “Background image” start screen, you can assign a picture: 1.
Configuring Favorites Opening the Event Log The preset start screen “Events” shows events like missed calls, new messages on the answering machine, new e-mail and the last web radio station played. You can open the events directly from the start screen: 1. Press the “OK” key. The “Event” menu appears. 2. Select an event by pressing the top the control ring. 3. Press “OK”. or the bottom of 11.
Configuring Favorites Moving Around Favorites You can change the order of the favorites. 1. Press the display key “Favorites”. 2. Select a favorite. 3. Press the display key “Options”. 4. Select “Move / OK”. 5. Press on the top or the bottom of the control ring until the favorite has the desired position in the list. Deleting Favorites 1. Press the display key “Favorites”. 2. Select a favorite. 3. Press the display key “Options”. 4. Select “Delete / OK”.
Settings in the FRITZ!Fon Menu 11.3 Settings in the FRITZ!Fon Menu Audio Settings The “Settings / Audio” menu contains the following settings: • Volume: volume of the ring tone, the handset and the speaker during hands-free calling The volume of the handset and the speaker can be set during a call; see Adjusting the Volume on page 16.
Settings in the FRITZ!Fon Menu Telephony Settings The “Settings / Telephony” menu contains the following settings: • Own telephone no.: See Selecting a Telephone Number before a Call on page 21. • Anonymous call: See CLIR for One Call (Case by Case) on page 33. • Pick up directly: See Enabling Direct Pickup on page 16. • Active keylock: See Enabling Active Keylock on page 18. • Secure: When “Secure” is enabled, FRITZ!Fon establishes only encrypted DECT connections.
Settings in the FRITZ!Box User Interface 11.4 Settings in the FRITZ!Box User Interface If you use a FRITZ!Box that supports DECT as a base station, you can configure your FRITZ!Fon in the user interface of the FRITZ!Box. All current functions and settings are at your disposal if both devices are using the current firmware. For more information, see the Updating the Firmware from page 57 section. 1. Open the user interface of the FRITZ!Box in a web browser (http://fritz.box). 2.
DECT Eco: Switching Off Radio When Idle • Ring tones: You can assign various ring tones to your FRITZ!Fon and add an MP3 file as a ring tone of your own. • Do Not Disturb: You can define periods of time when FRITZ!Fon does not ring. • Properties of the telephony device: You can enable various additional convenience features (for instance “busy on busy” and CLIR), select a background image for the start screen, and change the sound settings for your FRITZ!Fon. 11.
DECT Eco: Switching Off Radio When Idle 3. Enable the “DECT Eco” option and define when DECT Eco should be active. 4. Click the “Apply” button to save the settings. 5. Register your FRITZ!Fon and all of the cordless telephones on the FRITZ!Box again. DECT Eco is enabled.
Updating the Firmware 12 Updating the Firmware AVM provides firmware updates for FRITZ!Fon. A firmware update brings the functions of your FRITZ!Fon up to date. 12.1 Preparation: Checking the FRITZ!Box Firmware FRITZ!Fon must be registered with a FRITZ!Box with the latest firmware. Check the FRITZ!Box firmware: 1. Press the menu key . 2. Select “Home Network / OK / FRITZ!Box version / OK”. 3. Press the display key “Check”. 4.
Operating Devices in the Home Network 13 Operating Devices in the Home Network If you use a FRITZ!Box that supports DECT as a base station, you can use FRITZ!Fon to operate other devices in the home network. 13.1 Switching the FRITZ!Box Wireless Network On and Off The WLAN function of your FRITZ!Box can be switched on and off using the FRITZ!Fon. 1. Press the menu key . 2. Select “Home Network / OK / WLAN / OK”. 3. Press the display key “On ” or “Off”.
Using FRITZ!Fon as a Media Player 13.3 Using FRITZ!Fon as a Media Player With FRITZ!Fon you can play music stored on the FRITZ!Box or another media server in the home network. You can use your FRITZ!Fon as a playback device or use FRITZ!Fon to remote control music playback on other UPnP-compatible devices in the home network. 1. Press the menu key . 2. Select “Home Network / OK / Media Player / OK”. 3. Select a media server. 4. Press the display key “Options”. 5.
Writing Text 14 Writing Text This chapter describes how to enter text on the FRITZ!Fon. Entering Numerals, Letters and Text To enter a letter, a numeral, or a character, press the corresponding key.
Writing Text Setting Caps, Lower Case and Numerals Press the menu key until the desired text entry mode is set. The current text entry mode is displayed at the bottom right of the display. Text Entry Mode Function Shift Capitalize next letter ABC Capitals abc Lower case 123 Numerals Abc Standard mode Navigating in Text To move the cursor forward, press the right side of the control ring . When you hold the key down, the cursor jumps one word ahead.
Technical Specifications 15 Technical Specifications • DECT wireless standard • Range: up to 300 m indoors and up to 40 m outdoors • Standby time up to up to 240 h • Talking time up to up to 15 h • Display: 240 x 320 pixels, 262 000 colors • Keypad with function keys, control keys and number keys • 2 charging contacts on the bottom • On/off switch using the hang-up key • Loudspeaker/microphone • Dimensions (W x D x H): approx.
Customer Service 16 Customer Service 16.1 Support from the Support Team Our Service area can be reached in the Internet at: avm.de/en/service Click “Support” and open a support query. First you receive a selection of FAQs. If you require additional help on a technical problem, click “Contact Support”. Fill out the support form and send it to us. Our Support team will respond by e-mail as quickly as possible. If you cannot send us any support request by e-mail you can also reach our Support desk by fax.
Manufacturer’s Warranty 16.2 Manufacturer’s Warranty We offer a manufacturer’s warranty of 2 years on the hardware of this original product. Batteries constitute expendable material, which is not covered by the warranty. The warranty period begins with the purchase date from the first end user. Compliance with the warranty period can be proven by submission of the original invoice or comparable documents.
Legal Notice This documentation and the software it describes are protected by copyright. AVM grants the nonexclusive right to use the software, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. AVM reserves all rights that are not expressly granted to the licensee.
Declaration of CE Conformity Declaration of CE Conformity The manufacturer AVM GmbH Alt-Moabit 95 D 10559 Berlin herewith declares that the product FRITZ!Fon C4 DECT telephone complies with the following directives: 1999/5/EC R&TTE Directive: Radio Equipment and Telecommunications Terminal Equipment 2009/125/EC EU directive: ecodesign requirements for energy-related products 2011/65/EU EU directive: on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Disposal Information In accordance with European regulations, the FRITZ!Fon C4, as well as all devices and electronic components contained in the package, may not be disposed with household waste. After use, please dispose of FRITZ!Fon C4 and all electronic components and devices included with delivery at a collection point in your local community for the disposal of electric and electronic appliances. The FRITZ!Fon C4 contains a rechargeable battery.
Index A active keylock . . . . . . . . . . . . . 18 alarm . . . . . . . . . . . . . . . . . . . . 38 alternating between calls . . . . 34 answering machine. . . . . . . . . 28 audio settings . . . . . . . . . . . . . 52 charging . . . . . . . . . . . . . . . . . . 11 CLIR. . . . . . . . . . . . . . . . . . . . . . 33 condition upon delivery . . . . . . 53 consultation . . . . . . . . . . . . . . . 34 contacts, saving . . . . . . . . . . . . 26 convenience functions. . . . . . . 28 copyright. . . . . . . .
E e-mail reading . . . . . . . . . . . . . . . 42 sending. . . . . . . . . . . . . . . 43 setting up account . . . . . . 41 entering letters . . . . . . . . . . . . 60 entering numerals. . . . . . . . . . 60 entering special characters . . 60 entering text . . . . . . . . . . . . . . 60 K keys assignment . . . . . . . . . . . . 60 locking . . . . . . . . . . . . . . . . 17 overview . . . . . . . . . . . . . . . 8 L legal notice. . . . . . . . . . . . . . . . 65 F factory settings . . . . . . . . . . . .
R radio station configuring . . . . . . . . . . . . 47 listening to . . . . . . . . . . . . 47 recycling. . . . . . . . . . . . . . . . . . 67 redialing . . . . . . . . . . . . . . . . . 24 registering with DECT base station . . . . . . . . 11 reset. . . . . . . . . . . . . . . . . . . . . 53 ring tones. . . . . . . . . . . . . . . . . 52 RSS feeds. . . . . . . . . . . . . . . . . 44 T telephone book finding entry . . . . . . . . . . . 25 new entry. . . . . . . . . . . . . .
