Operation Manual

Recording Calls
56 FRITZ! – 7 FRITZ!fon
You can end the three-party conference by terminating both
calls. You can do this in two ways:
Clear the connection by the usual method, using the
button to the left.
Put one of the parties on hold again, and end the other
connection.
Recording Calls
Once a connection has been established, the “Record call”
function is available. Click the “Record call” button to begin
recording the call. To stop recording, click the button again
or hang up the connection.
The recorded call is saved as the file FRITZFON.WAV, which is
replaced each time a call is recorded. If you want to keep the
file longer, you must rename it.
Suspend/Resume
A call can be parked at the S
0
bus in FRITZ!fon. An example:
Interrupt the call. The call is held on the line and you can
pick it up at another workplace or in another location.
For call suspension, what is known as a connection code is
required, an ID between 0 and 99 specified by the user. En-
ter this code in the “Suspended call ID” field on the “ISDN”
page.
Select the “Suspend call” command in the “Fon” menu to
suspend this call. To resume the call at another telephone,
enter the caller ID defined in FRITZ!fon. See the telephone's
manual for instructions.
Please note that the “Suspend” and “Resume” functions are
only available when FRITZ!fon and the other terminal device
are connected to the same point-to-multipoint ISDN line.