Operation Manual

Installation Requirements
FRITZ! – 1 Introduction 7
1.1 Installation Requirements
To install and use FRITZ! you will need:
A computer with an Intel or AMD processor and hard-
ware suitable for the operating system
Microsoft Windows XP, Me, 2000 or Windows 98
An ISDN-Controller with CAPI 2.0 driver software to sup-
port the protocols X.25, X.75 and Group 3 fax. We rec-
ommend the AVM FRITZ! family of ISDN-Controllers and
the AVM ISDN-Controller B1 family. The ISDN-Controller
should be installed before you begin installing FRITZ!.
See your ISDN-Controller manual for instructions.
To operate FRITZ!fon, you must have a sound card and
driver with full-duplex capability, and suitable sound in-
put/output equipment (such as a headset).
To ensure security during remote playback of your
FRITZ!fon answering machine, the driver software of
your ISDN-Controller must support DTMF (touch-tone)
dialing.
If your system meets these requirements, follow the instruc-
tions in the next chapter to install FRITZ!.
1.2 Package Contents
The FRITZ! package contains:
The software on CD
This manual