Operation Manual

4 FRITZ!X PC Configuration

7. To save changes in the PBX, click

ansmitansmit

ansmit at the bottom of

the window. The data then will be sent to the PBX for storage

in permanent memory. To load the most recently saved

settings from your PBX, click

oadoad

oad.

Outside Dialing

Each extension can be configured for automatic outside dialing

or as an internal extension. With automatic outside dialing, the

dial tone sounds immediately when the receiver is lifted. Internal

PBX configuration means that a „0“ must be dialed to access

the outside dial tone.

Preferred dial tone/PBX connection

Activate automatic outside dialing for an extension by selecting

the “Preferred dial tone” checkbox. A checkmark in this box

indicates that the option is active

If this checkbox is empty, the line functions as an extension of

the internal PBX.

Call Waiting Enable/Disable

For details about the „Call Waiting“ function, please see Chapter 5,

„PBX Operation“.

Call waiting can be switched on and off for each extension. If

you connect certain devices originating from non-European

countries to your extension, they may misinterpret the call

waiting signal

. .

Such devices include various telefax machines

and modems.

If such problems arise, disable the call waiting

function.

When call waiting is active, some modem and telefax connections

may malfunction.

Activate the call waiting function for an extension by deactivating

the „Suppress Call Waiting“ option.

When the checkbox is selected, call waiting is enabled.