Operating Instructions and Installation Instructions

Configuring an Internet Connection Automatically over DSL

Automatic

Configuration

Procedure

Proceed as follows to perform automatic configuration:

1. Connect the FRITZ!Box to the DSL line.

The automatic configuration starts automatically.

2. Wait until the automatic configuration has conclud-

ed. This process can take around five to ten minutes.

During this time the FRITZ!Box receives all necessary

settings directly from the autoconfiguration server of

your Internet Service Provider.

After automatic configuration you can surf the web

right away and use any other contracted services

(like Internet telephony).

3. To check that the automatic configuration was com-

pleted successfully, open a web browser and enter

any Internet address.

Then you may want to try out the other services or-

dered from your Internet Service Provider, such as In-

ternet telephony.

Your Internet Service Provider transmitted you informa-

tion about the configuration of your Internet connection.

Always perform the Internet connection setup as de-

scribed by your provider!

Further settings can be configured in the user interface of

your FRITZ!Box. The “Wizards” area offers easy-to-use,

step-by-step instructions on all important functions. Use

these to set up the FRITZ!Box in accordance with your own

needs.