Operation Manual

System Requirements
KEN! – 1 Welcome to KEN! 13
1.4 System Requirements
The following hardware requirements must be met for KEN!
operation:
KEN! Service
•
an ISDN adapter
The ISDN adapter must be equipped with the applica-
tion interface CAPI 2.0, like any AVM ISDN-Controller
from the FRITZ!Card series or an AVM ISDN-Controller
B1.
• An IBM or 100%-compatible computer with:
– 1 network adapter to connect the KEN!
Service PC
with your network
– CD-ROM drive
– Pentium processor 166 MHz or higher
– 32 MB RAM
– Microsoft Windows Me, 98, 2000, NT 4.0 (worksta-
tion or server with current Service Pack), or Windows
95 operating system, including the relevant installa-
tion CD
– 20 MB memory on the hard drive for installation and
an additional 150 MB for temporary storage of
E-mail and Internet pages
KEN! Client
• An IBM or 100%-compatible computer with:
network adapter, CD-ROM drive, Pentium processor,
16 MB RAM and Microsoft Windows Me, 98, Windows
2000, Windows NT 4.0 (workstation or server) or Win-
dows 95 operating system including the installation CD
Before installing KEN! Service and KEN! Client, note the
steps described below to prepare for installation.