Operation Manual

Step 2: Check the Network Adapter
KEN! – 2 Installing and Configuring KEN! Service 19
The FRITZ!data window after establishing a connection
7. Clear down the connection to the ADC with the function
key “F3”.
If you were not able to connect to the ADC, check that your
ISDN adapter is installed and functioning properly.
Step 2:
Check the
Network Adapter
Determine whether the TCP/IP protocol is bound to the net-
work adapter. Also check whether an IP address is specified
for this network adapter. Proceed as follows:
Windows Me, 98 and 95
1. Click through “Start / Settings / Control Panel / Net-
work” to open the Windows network settings.
2. Look for the “TCP/IP” entry in the list of installed net-
work components.
If there are multiple entries for TCP/IP, look for the entry
“TCP/IP-> <name of the network adapter>”.